Abstract
The mixing enhancement and core length reduction of a jet without significant loss of thrust are essential for reducing infrared radiation, mitigating aeroacoustic noise, improving combustion characteristics, and thrust vectoring. The jet mixing can be improved by manipulating the flow behavior. In subsonic and sonic jets, the flow manipulation may be achieved by utilizing nozzles with non-circular geometries that shed vortices of varying size due to their non-uniform azimuth curvatures. Non-uniform vortices generate differential spreading along the nozzle’s perimeter, causing axis switching and improving entrainment characteristics. Therefore, the present study examines the effects of two non-circular nozzle exit shapes (elliptic and square) on the mixing augmenting efficacy at subsonic and sonic flow conditions. The circular nozzle is tested for comparison. Both quantitative and qualitative analyses evaluate the efficacy of nozzles with non-circular exit geometries. Among the configurations investigated, the elliptic nozzle is superior in shortening the potential core length and enhancing the jet spread. A maximum reduction of 18.75% in core length with rapid jet decay was accomplished with the elliptic nozzle. The measurement of pressure profiles at different streamwise locations reveals that the spread rate is greater for elliptic and square jets than their circular counterpart. The elliptic jet exhibits the highest spread along the minor-axis direction compared to the major-axis direction. The differential jet spread rate in the elliptical jet causes an early axis-switching––direct evidence of mixing augmentation. Shadowgraph images show the asymmetric pattern of shock cell structures and differential spreading in elliptic and square jets.
Keywords
Get full access to this article
View all access options for this article.