Sage Journals: Discover world-class research

Retricted access

Research article

First published 2025-8

Investigation of the effect of minimum quantity lubrication and Ranque–Hilsch vortex tube cooling on cutting forces,surface roughness and cutting zone temperature in turning Al 6082 T4 alloy

Selçuk Yağmur

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2011-9

Experimental investigation of cutting forces and tool wear during laser-assisted milling of Ti-6Al-4V alloy

S Sun, M Brandt, J E Barnes [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2011-10

A fully coupled thermomechanical two-dimensional simulation model for orthogonal cutting: formulation and simulation

M Agmell, A Ahadi, J-E Ståhl

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2015-4

Correlation of internal and surface temperatures during laser cutting of epoxy-based carbon fibre reinforced plastics

Sven Bluemel, Richard Staehr, Peter Jaeschke [...]

Journal of Reinforced Plastics and Composites

Free access

Research article

First published 2021-6

Thermal modelling of cutting tool temperatures and heat partition in orthogonal machining of high-strength alloy steel

Faraz Akbar, Muhammad Arsalan

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2017-3

Effect of coring conditions on temperature rise in bone

Md. Monirul Islam, Xiaodu Wang

Bio-Medical Materials and Engineering

Retricted access

Research article

First published 1963-6

Temperatures in Orthogonal Metal Cutting

Industrial Administration and Engineering Production Group Applied Mechanics Group, G. Boothroyd

Proceedings of the Institution of Mechanical Engineers

Free access

Research article

First published 2002-2

Thermal and microstructural analysis of orthogonal cutting of a low alloyed carbon steel using an infrared—charge-coupled device camera technique

R M'Saoubi, C Le Calvez, B Changeux [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1997-5

Temperature evaluation of cutting tools during machining of hardened bearing steel.using polycrystalline cubic boron nitride and ceramic cutting tools

A. M. Abrão, D. K. Aspinwall

Materials Science and Technology

Retricted access

Research article

First published 2020-9

Multi-pass laser cutting of carbon/Kevlar hybrid composite: Prediction of thermal stress,heat-affected zone,and kerf width by thermo-mechanical modeling

K Moghadasi, KF Tamrin

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Search results