Sage Journals: Discover world-class research

Free access

Research article

First published 2002-10

On cutting forces in peripheral milling of curved surfaces

L Zhang, L Zheng, Z-H Zhang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2022-8

The cutting vibration and surface information in whirlwind milling a large screw

Qin Guo, Tiezheng Guo, Yulin Wang

Advances in Mechanical Engineering

Retricted access

Research article

First published 2015-11

Machining of bone: Analysis of cutting force and surface roughness by turning process

MY Noordin, N Jiawkok, PYMW Ndaruhadi [...]

Proceedings of the Institution of Mechanical Engineers,Part H: Journal of Engineering in Medicine

Retricted access

Research article

First published 1997-7

Geometrical design of cutting tools with surfaces of revolution for helical surfaces

N Oancea, V G Oancea

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2003-7

Increasing cut surface quality with various cutting nozzle head oscillations for abrasive aquajet machining

K J Patel, F L Chen

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2016-2

Precise cutting microstructured superhydrophobic surface

Y. Luo, D. Zhang, X. Xu [...]

Surface Engineering

Retricted access

Research article

First published 2009-2

Experimental investigations on the influence of emulsifier content in cutting fluids on machined surface

R R Srikant, Nageswara D Rao, P N Rao

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Free access

Research article

First published 2009-3

Dynamic cutting process modelling and its impact on the generation of surface topography and texture in nano/micro cutting

L Zhou, K Cheng

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2023-10

Surface integrity investigation and multi-objective optimization in high-speed cutting of AISI 304 stainless steel for dry cutting and MQCL conditions

Yinzhi Wang, Chengli Zheng, Niancong Liu [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2011-4

Effect of cutting parameters on cutting force and surface roughness in milling alumina reinforced Al–6Zn–2Mg–2Cu composites

M Übeyli, A Acır, Ö Keleş [...]

Powder Metallurgy

Search results