Sage Journals: Discover world-class research

Retricted access

Research article

First published 1999-3

Aerodynamic loss prediction of axial flow turbine blade rows with coolant injection

D Bohn, T. S. Kim

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 2023-3

Effect of intake temperature and coolant temperature with injection strategy on gasoline compression ignition combustion stability under the idle condition

Binyang Wu, Zhenyuan Zi, Xionghui Zou [...]

International Journal of Engine Research

Retricted access

Research article

First published 2022-12

Effects of suction surface near tip coolant injection on the aerodynamics of tip leakage flow in a high-pressure turbine cascade

Zuhao Liu, Yansong She, Xiaozhi Duan [...]

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 2012-10

Effect of the valve timing and the coolant temperature on particulate emissions from a gasoline direct-injection engine fuelled with gasoline and with a gasoline–ethanol blend

Longfei Chen, Richard Stone, Dave Richardson

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Retricted access

Research article

First published 2023-5

The influence of intake flow and coolant temperature on gasoline spray morphology during early-injection DISI engine operation

David L Reuss, Namho Kim, Magnus Sjöberg

International Journal of Engine Research

Open access

Research article

First published 2014

Numerical Analysis of Supersonic Film Cooling in Supersonic Flow in Hypersonic Inlet with Isolator

Silong Zhang, Jiang Qin, Wen Bao [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 1983-7

Heat Losses from a Divided-Chamber Diesel Engine

A C Alkidas, R M Cole

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2007-4

Optimisation of continuous and pulsed cooling in injection moulding processes

A. G. Smith, L. C. Wrobel, B. A. McCalla [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2023-7

Visualization of soot formation in load transients during GDI engine warm-up

Sreelekha Etikyala, Lucien Koopmans, Petter Dahlander

International Journal of Engine Research

Retricted access

Research article

First published 1982-11

Design and Construction of a Low-Flow,Low-Power Torch for Inductively Coupled Plasma Spectrometry

R. Rezaaiyaan, G. M. Hieftje, H. Anderson [...]

Applied Spectroscopy

Search results