Sage Journals: Discover world-class research

Retricted access

Review article

First published 1995-11

A Note on Tip Relief and Backlash Allowances in Non-Metallic Gears

D Walton, A A Tessema, C J Hooke [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Review article

First published 1994-3

Load Sharing in Metallic and Non-Metallic Gears

D Walton, A A Tessema, C J Hooke [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 1996-5

Is Judging Time-to-Contact Based on ‘Tau’?

Jeroen B J Smeets, Eli Brenner, Sonia Trébuchet [...]

Perception

Retricted access

Research article

First published 2020-4

Comparison on torsional mesh stiffness and contact ratio of involute internal gear and high contact ratio internal gear

Yanzhong Wang, Delong Dou, E Shiyuan [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2011-10

The influence of manufacturing method on the running-in of gears

S Sjöberg, S Björklund, U Olofsson

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2022-12

Modeling and analysis of sliding wear based on fractal surface reconstruction in line contact mixed lubrication

Jiang Zhao, Wei Sheng, Zhengminqing Li [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2016-4

Comparative study of stress analysis of gears with different helix angle using the ISO 6336 standard and tooth contact analysis methods

Layue Zhao, Robert C Frazer, Brian Shaw

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2025-9

Analysis and optimization of time-varying meshing parameters of spiral bevel gear with consideration of load sensitivity

Yunqing Cai, Jianwei Lu, Stephanos Theodossiades [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Retricted access

Research article

First published 2011-6

Non-linear vibration of dagger-shaped atomic force microscope cantilevers by considering the Hertzian contact theory

A Sadeghi, H Zohoor

Proceedings of the Institution of Mechanical Engineers,Part K: Journal of Multi-body Dynamics

Retricted access

Research article

First published 2016-12

On the crucial role of ellipticity on elastohydrodynamic film thickness and friction

J-D Wheeler, N Fillot, P Vergne [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Search results