Sage Journals: Discover world-class research

Retricted access

Research article

First published 2024-10

Comparative analysis on friction fields derived from different bottom pins in the drafting system of ring spinning and their effects on yarn properties

Yue Sun, Jiajia Dai, Junjie Liu [...]

Textile Research Journal

Retricted access

Research article

First published 2004-11

Influence of extruder geometry on laminar mixing: entropic analysis

M. Camesasca, I. Manas-Zloczower, M. Kaufman

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2009-7

Effect of reduced or zero pin length and anvil insulation on friction stir spot welding thin gauge 6111 automotive sheet

D. Bakavos, P. B. Prangnell

Science and Technology of Welding and Joining

Free access

Research article

First published 2015-10

Heat transfer analyses in friction stir welding of aluminium alloy

Deepak Kumar Yaduwanshi, Swarup Bag, Sukhomay Pal

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1999-5

The Low Anterior Five-O'clock Portal During Arthroscopic Shoulder Surgery Performed in the Beach-Chair Position

Albert W. Pearsall, Tom F. Holovacs, Kevin P. Speer

The American Journal of Sports Medicine

Retricted access

Research article

First published 2014-2

Filling friction stir weld keyhole using pin free tool and T shaped filler bit

G. F. Zhang, W. M. Jiao, J. X. Zhang

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2019-10

Effect of variation of cylindrical pin fins height on the overall performance of microchannel heat sink

Mohammad Owais Qidwai, Mohammad Muzaffarul Hasan

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2012-4

High strength lap joint of aluminium and stainless steels fabricated by friction stir welding with cutting pin

J T Xiong, J L Li, J W Qian [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2007-09

Impact and Damage Prediction of Sandwich Beams with Flexible Core Considering Arbitrary Boundary Effects

Mijia Yang, Pizhong Qiao

Journal of Sandwich Structures & Materials

Retricted access

Research article

First published 2023-9

Consumable pin-friction stir spot welding of Al-Mg-Si alloy via pre-created hole and refilling: Microstructure evolution,defects,and shear/tensile failure load

Amir Baghdadchi, Mojtaba Movahedi

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results