Sage Journals: Discover world-class research

Retricted access

Research article

First published 2012-5

Analysis of weld location effect and thickness ratio on formability of tailor welded blank

M Riahi, A Amini, J Sabbaghzadeh [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2011-1

Mechanical performance of three thickness resistance spot welded low carbon steel

A. Tavasolizadeh, S. P. H. Marashi, M. Pouranvari

Materials Science and Technology

Retricted access

Research article

First published 2026-2

Elastic pre-compensation for welding-induced shrinkage and bending deformations of thick plates by friction stir welding

Chang Gao, Ke Yuan, Zitong Yu [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2000-5

Measurement and prediction of residual stresses in thick-section steel welds

D. J Smith, P J Bouchard, D George

The Journal of Strain Analysis for Engineering Design

Retricted access

Research article

First published 2010-10

Overload failure behaviour of dissimilar thickness resistance spot welds during tensile shear test

S. P. H. Marashi, M. Pouranvari, M. Salehi [...]

Materials Science and Technology

Retricted access

Research article

First published 2024-12

Thick-wire GMAW for fusion welding of high-strength steels

M. Neumann, A. Haelsig, K. Hoefer [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2020-8

Evaluation of through-thickness residual stresses in conventional and narrow grooved stainless steel welds

PK Taraphdar, MM Mahapatra, AK Pradhan [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Free access

Research article

First published 2021-5

Evaluation of through-thickness residual stresses and microstructure in SA516 Gr. 70 steel welds

Pradeeptta Kumar Taraphdar, Manas Mohan Mahapatra, Arun Kumar Pradhan [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2010-9

Effects of thickness ratio and length ratio on deformation uniformity of tailor-welded tube hydroforming

G N Chu, G Liu, S J Yuan [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2013-5

Improvement of toughness and strength of thick structural steel weld by friction stir welding conditions

Y Morisada, H Fujii, R Nishimoto [...]

Science and Technology of Welding and Joining

Search results