Sage Journals: Discover world-class research

Retricted access

Research article

First published 2008-4

Prediction of Long and Short Residue Properties of Crude Oils from Their Infrared and Near-Infrared Spectra

Peter De Peinder, Derek D. Petrauskas, Fred Singelenberg [...]

Applied Spectroscopy

Retricted access

Research article

First published 2024-5

Short-term oxidation and residual compression properties of needle-punched carbon/carbon composites

Meng Han, Zhichao Wang, Xingyu Zhang [...]

Journal of Composite Materials

Free access

Research article

First published 1989-10

Prediction of Process Induced Thermal Residual Stresses in Injection Molded Composites

Rushad F. Eduljee, John W. Gillespie, Roy L. Mccullough

Journal of Thermoplastic Composite Materials

Retricted access

Research article

First published 2008-11

Modification of Asphalt Properties

El Sayed H. El Ashry, Laila Awad, Mohamed Abed El Zaher [...]

Progress in Rubber,Plastics and Recycling Technology

Retricted access

Research article

First published 2019-3

Factors Affecting the Tracking Performance of Tack Coat Materials

Quan Lv, Hussain U. Bahia

Transportation Research Record: Journal of the Transportation Research Board

Retricted access

Research article

First published 2016-11

Simulations in multipass welds using low transformation temperature filler material

L. Novotný, H. F. G. de Abreu, H. C. de Miranda [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2010-1

Rheological Behavior of Emulsion Residues Produced by Evaporative Recovery Method

Andrew J. Hanz, Zelalem A. Arega, Hussain U. Bahia

Transportation Research Record: Journal of the Transportation Research Board

Retricted access

Research article

First published 2013-3

Correlation of temperature dependences of macro- and micro-interfacial properties in carbon fiber/epoxy resin composite

HX Liu, YZ Gu, M Li [...]

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2024-06

Finite Element Simulation of Residual Stress in Laser Additive Manufactured Functionally Gradient Materials Based on Bessel Heat Source Model

Zihe Liu, Changyuan Yu, Hongjian Zhao [...]

3D Printing and Additive Manufacturing

Retricted access

Research article

First published 2014-2

Experimentally validated residual stresses and distortion prediction for dual frequency induction hardening

M. Schwenk, J. Hoffmeister, V. Schulze

International Journal of Applied Electromagnetics and Mechanics

Search results