Sage Journals: Discover world-class research

Open access

Research article

First published 2025-8

Direct energy deposition via arc manufacturing using ultra-low heat input gas metal arc welding

Emanuel Bruno Ferreira dos Santos, Paulo D’Angelo Costa Assunção, Nazmul Huda [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2012-10

Effect of single pass welding heat input on microstructure and hardness of submerged arc welded high strength low carbon bainitic steel

L Y Lan, C L Qiu, D W Zhao [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2009-3

Measured residual stress distributions for low and high heat input single weld beads deposited on to SA508 steel

J. A. Francis, M. Turski, P. J. Withers

Materials Science and Technology

Retricted access

Research article

First published 2022-5

Effect of low heat-input double-pulse gas metal arc welding on weld formation and microstructure of 6061 aluminium alloy

Xiaoyan Yu, Jiaxiang Xue, Qingkai Shen [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2000-2

Influence of heat input and travel speed on microstructure and mechanical properties of double tandem submerged arc high strength low alloy steel weldments

D.M. Viano, N.U. Ahmed, G.O. Schumann

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2014-12

Improvement of impact toughness of simulated heat affected zone by addition of aluminium

L. Yu, H. H. Wang, X. L. Wang [...]

Materials Science and Technology

Retricted access

Research article

First published 2020-5

Interactions of the process parameters and mechanical properties of laser butt welds in thin high strength low alloy steel plates

Patricio Gustavo Riofrío, Carlos Alexandre Capela, José AM Ferreira [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2022-1

Control of humping phenomenon and analyzing mechanical properties of Al–Si wire-arc additive manufacturing fabricated samples using cold metal transfer process

Yashwant Koli, N Yuvaraj, Aravindan Sivanandam [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2006-7

Properties and improvement of super fine grained steel friction welded joint

M. Kimura, M. Kusaka, K. Seo [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2024

Analyzing the effect of different shielding atmospheres on fiber laser welding parameters for modified 9Cr-1Mo steel

Rakesh S, Raghuraman S

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Search results