Sage Journals: Discover world-class research

Retricted access

Research article

First published 2019-3-22

Comparative study between analytical and FE analysis for the ultimate strength assessment of pitted platings

Vincenzo Piscopo, Antonio Scamardella

International Shipbuilding Progress

Retricted access

Research article

First published 1985-1

Investigation and Analysis of Liquid Phase Sintering of Fe—Cu and Fe–Cu–C Compacts

S. J. Jamil, G. A. Chadwick

Powder Metallurgy

Retricted access

Research article

First published 2014-8

Mott–Schottky analysis of passive films on Cu containing Fe–20Cr– x Cu ( x = 0,4) alloys

I. H. Toor, M. Ejaz, H. S. Kwon

Corrosion Engineering,Science and Technology: The International Journal of Corrosion Processes and Corrosion Control

Retricted access

Research article

First published 1997-10

Atomprobe analysis of initial decomposition of Fe-N martensite

M. J. van Genderen, S. J. Sijbrandij, A. Böttger [...]

Materials Science and Technology

Retricted access

Research article

First published 2006-08

Mechanical Characterization of Thin Film Materials with Nanoindentation Measurements and FE Analysis

Xiaoqin Huang, Assimina A. Pelegri

Journal of Composite Materials

Retricted access

Research article

First published 2018-2

Optimization of tube drawing process through FE analysis,intelligent computation,and experimental verification

Mirshaban Jafari, Morteza Hosseinzadeh, Majid Elyasi

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2015-12

Coupled FE–CFD thermal analysis for a cooled turbine disk

Umesh Javiya, John Chew, Nick Hills [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2006-6

Transient liquid phase sintering of high density Fe 3 Al using Fe and Fe 2 Al 5 –FeAl 2 powders Part 2 – Densification mechanism analysis

N. K. Xydas, L. A. Salam

Powder Metallurgy

Retricted access

Research article

First published 2011-8

Comparative analysis of slag systems Cu–Fe–O–SiO 2 and Cu–Fe–O–CaO between 1100 and 1300°C

M I Devia, M A Sánchez

Mineral Processing and Extractive Metallurgy: Transactions of the Institutions of Mining and Metallurgy

Retricted access

Research article

First published 2022-4

Corrosion,optimization and surface analysis of Fe-Al 2 O 3 -CeO 2 metal matrix nanocomposites

Pallav Gupta, Naseem Ahamad, Jimmy Mehta [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results