Coupled FE–CFD thermal analysis for a cooled turbine disk

Abstract

This paper presents transient aero-thermal analysis for a gas turbine disk and the surrounding air flows through a transient slam acceleration/deceleration “square cycle” engine test, and compares predictions with engine measurements. The transient solid–fluid interaction calculations were performed with an innovative coupled finite element (FE) and computational fluid dynamics (CFD) approach. The computer model includes an aero-engine high pressure turbine (HPT) disk, adjacent structure, and the surrounding internal air system cavities. The model was validated through comparison with the engine temperature measurements and is also compared with industry standard standalone FE modelling. Numerical calculations using a 2D FE model with axisymmetric and 3D CFD solutions are presented and compared. Strong coupling between CFD solutions for different air system cavities and the FE solid model led to some numerical difficulties. These were addressed through improvement of the coupling algorithm. Overall performance of the coupled approach is very encouraging giving temperature predictions as good as a traditional model that had been calibrated against engine measurements.

Keywords

Gas turbine secondary air system turbine disk structure–fluid interaction heat transfer CFD FEA FE–CFD coupling

Get full access to this article

View all access options for this article.

References

Dixon

Verdicchio

Benito

. Recent developments in gas turbine component temperature prediction methods, using computational fluid dynamics and optimization tools, in conjunction with more conventional finite element analysis techniques. Proc IMechE, Part A: J Power and Energy 2004; 218: 241–255.

Chew

Hills

. Computational fluid dynamics and virtual aeroengine modelling. Proc IMechE, Part C: J Mechanical Engineering Science 2009; 223: 2821–2834.

Chew

Hills

. Computational fluid dynamics for turbomachinery internal air systems. Philosophical Transact R Soc 2007; 365: 2587–2611.

Verdicchio J, Chew J and Hills N, Coupled fluid/solid heat transfer computation for turbine disks. ASME Paper No. 2001-GT-0205, 2001.

Illingworth J, Hills N and Barnes C. 3D fluid--solid heat transfer coupling of an aero--engine pre-swirl system. ASME Paper No. 2005-GT-68939, 2005.

Autuf V. Aerothermal modelling for axial turbines. PhD Thesis, University of Surrey, UK, 2007.

Sun

Chew

Hills

. Efficient finite element analysis/computational fluid dynamics coupling for engineering applications. J Turbomachine 2010; 132: 031016–1–03101 6–9.

Amirante D, Hills N, Barnes CJ. Thermo-mechanical finite element analysis/computational fluid dynamics coupling of an interstage seal cavity using torsional spring analogy. J Turbomachinery 2012; 134: 051015.

Ganine

Javiya

Hills

. Coupled fluid-structure transient thermal analysis of a gas turbine internal air system with multiple cavities. J Eng Gas Turbines Power 2012; 134: 102508–102508.

10.

Javiya

Chew

Hills

. Evaluation of computational fluid dynamics and coupled fluid-solid modeling for a direct transfer pre-swirl system. J Eng Gas Turbine Power 2013; 135.

11.

Verdicchio JA. The validation and coupling of computational fluid dynamics and finite element codes for solving industrial problems. PhD Thesis, University of Sussex, UK, 2001.

12.

Javiya U. Aero-thermal analysis of turbine disc and surrounding flows. PhD Thesis, University of Surrey, UK, 2012.

13.

Verstraete

Alsalihi

Braembussche

. Numerical study of the heat transfer in micro gas-turbines. J Turbomachinery 2006; 129: 835–841.

14.

Fluent Manual. Fluent 6.3 user manual, Ansys Inc, 2006.

15.

Moinier P. Algoritham developements of unstructured viscous flow solver. PhD Thesis, University of Oxford, UK, 1999.

16.

Javiya

Chew

Hills

. CFD analysis of flow and heat transfer in a direct transfer pre-swirl system. JTurbomachine 2011; 134: 031017–031017.

17.

ICEMCFD manual. ICEMCFD 13 user manual, Ansys Inc, 2011.

18.

Javiya U, Chew JW, Hills N, et al. A comparative study of cascade vanes and drilled nozzle designs for pre-swirl. ASME Paper No. GT2005-46006, 2011.

19.

Dorfman

. Hydrodynamic resistance and heat loss of rotating solids, UK: Oliver and Boyd, 1963.

20.

Long

Turner

Kais

. Measurement and CFD prediction of the flow within an hp compressor drive cone. J Turbomachine 2003; 125: 165–172.

21.

Tham KM, Long CA, Turner AB, et al. Computation of the flow in a H.P. compressor drive cone cavity. In: IGTC Conference, Tokyo, Paper No. TS-024, 2003.

22.

Owen

Pincombe

. Vortex breakdown in a rotating cylindrical cavity. J Fluid Mech 1979; 90: 109–127.

23.

Bohn D, Ren J and Tuemmers C. Investigation of the unstable flow structure in a rotating cavity. ASME Paper no. GT2006-90494, 1433-1442 2006.

24.

Sun

Lindblad

Chew

. LES and RANS Investigations into buoyancy-affected convection in a rotating cavity with a central axial through flow. J Eng Gas Turbine Power 2007; 129: 318–25.