Sage Journals: Discover world-class research

Retricted access

Research article

First published 2021-1

Effect of filler metal chemical composition on the TiAl/IN738 dissimilar brazed joint

D. Kokabi, A. Kaflou, H. R. Rastifard

Materials Science and Technology

Retricted access

Research article

First published 2001-10

Comments on spread of plasticity from edge crack close to interface of dissimilar metal joint

S.J. Wu, J.F. Knott

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2017-5

Microstructure and mechanical behaviour of cold metal transfer welded Mg/Al dissimilar joint using wire AZ31 as filler metal

P. Wang, S. S. Hu, J. Q. Shen [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2001-10

Comparison of creep behaviour of 2.25Cr–1Mo/9Cr–1Mo dissimilar weld joint with its base and weld metals

K. Laha, S. Latha, K. Bhanu Sankara Rao [...]

Materials Science and Technology

Retricted access

Research article

First published 2009-7

An experimental and numerical investigation of fracture resistance behaviour of a dissimilar metal welded joint

M K Samal, K Balani, M Seidenfuss [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2022-8

Influence of cyclic aging on adhesive mode mixity in dissimilar composite/metal double cantilever beam joints

Mostafa Moazzami, Majid R Ayatollahi, Alireza Akhavan-Safar [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2010-5

Positional dependence of material flow in friction stir welding: Analysis of joint line remnant and its relevance to dissimilar metal welding

K. Kumar, S. V. Kailas

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2020-1

Microstructure and mechanical behaviour of CMT-welded Mg/Al dissimilar joint using Inconel 625 as filler metal

Peng Wang, Hanzheng Zhang, Shengsun Hu [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2014-8

Effect of Ti content in Ag–Cu–Ti activated filler metal on dissimilar joint formation of sialon and WC–Co alloy by laser brazing

K. Nagatsuka, S. Yoshida, Y. Sechi [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2008-11

Interfacial phenomena of cold metal transfer (CMT) welding of zinc coated steel and wrought aluminium

H. T. Zhang, J. C. Feng, P. He

Materials Science and Technology

Search results