The situation encountered by a crack in a dissimilar metal joint is analysed using a weight function method applied to a Dugdale crack model. The stress intensity factor at an effective crack tip located in the vicinity of the interface can be calculated from the weight function for a constant pressure load system, based on the principle of elastic stress superposition. The effects on the stress intensity factor and the crack tip opening displacement of a hard transitional zone, which is developed near the interface, are discussed.
ToyodaM., MinamiF., RuggieriC., ThaulowC., and HaugeM.: in ‘Mis-matching of welds’, ESIS17, (ed. K.-H. Schwalbe and M. Koçak), 399–415, 1994, Geestacht, GKSS Research Centre.
5.
ThaulowC., PaauwA. J., HaugeM., ToyodaM., and MinamiF.: in ‘Mis-matching of welds’, ESIS17, (ed. K.-H. Schwalbe and M. Koçak), 417–432; 1994, Geestacht, GKSS Research Centre.
6.
KfouriA. P.: ‘The elasto-plastic analysis of continua by finite element methods’, PhD thesis, University of Cambridge, UK, 1970.
7.
SugimuraY., LimP. G., ShihC. F., and SureshS.: Acta Metall. Mater., 1995, 43, 1157–1169.
8.
WuS. J.: ‘Micro-mechanisms of fracture in transition welds’, PhD thesis, University of Birmingham, UK, 1997.
9.
WuS. J. and KnottJ. F.: Proc. 2nd Int. Symp. on ‘Mis-matching of interfaces and welds’, (ed. K.-H. Schwalbe and M. Koçak), 587–598; 1997, Geestacht, GKSS Research Centre.
10.
KluehR. L. and KingJ. F.: Weld. J., 1982, 61, 302s–311s.
11.
GittosM. F. and GoochT. G.: Weld. J., 1992, 71, 461s–472s.
12.
DugdaleD. S.: J. Mech. Phys. Solids, 1960, 8, 100–104.
13.
WuX.-R. and CarlssonA. J.: ‘Weight functions and stress intensity factor solutions’; 1991, Oxford, Pergamon Press.
14.
KnottJ. F. and WitheyP. A.: ‘Fracture mechanics – worked examples’; 1993, London, The Institute of Materials.
15.
StreitenbergerP. and KnottJ. F.: Philos. Mag. A, 1997, 75A, 469–483.
16.
BuecknerH. F.: Z. Angew. Math. Mech., 1970, 50, 529–546.
17.
RiceJ. R.: Int. J. Solids Struct., 1972, 8, 751–758.
18.
BowieO. L. and TracyP. G.: Eng. Fract. Mech., 1978, 10, 249–256.
19.
PetroskiH. J.: Int. J. Fract., 1979, 15, 217–230.
20.
RitchieR. O., KnottJ. F., and RiceJ. R.: J. Mech. Phys. Solids, 1973, 21, 395–410.
21.
‘Guidance on methods for assessing the acceptability of flaws in fusion welded structure’, BS: PD6493: 1991.
22.
RiceJ. R.: J. Mech. Phys. Solids, 1974, 22, 17–26.
23.
BilbyB. A., CottrellA. H., and SwindenK. H.: Proc. R. Soc., 1963, A272, 304–314.
24.
McmeekingR. M.: J. Mech. Phys. Solids, 1977, 25, 357–381.
25.
BurdekinF. M. and StoneD. E. W.: J. Strain Anal., 1966, 1, 145–153.
