Search results: Sage Journals

Restricted accessResearch articleFirst published May, 2013

Influence of strain rate on hot ductility of austenitic stainless steel slab

G Q Hou, L Zhu

Materials Science and Technology

Restricted accessResearch articleFirst published September, 2010

Numerical Simulation of Multiple Cracking in ANSI 304 Stainless Steel Under Thermal Fatigue

Hai Qing, Wei Yang, Jian Lu

International Journal of Damage Mechanics

Restricted accessResearch articleFirst published October, 2013

Acoustic emission assisted fracture zone analysis of cellulose fibre materials

P Isaksson, R Hägglund

Journal of Composite Materials

Restricted accessResearch articleFirst published January, 1980

Weldability and hot cracking in thorium-doped iridium alloys

S. A. David, C. T. Liu

Materials Science and Technology

Restricted accessResearch articleFirst published March, 2012

Effect of temperature on impact properties and microstructural evolution of twinning induced plasticity steel

D Z Li, Y H Wei, L F Hou [...]

Materials Science and Technology

Restricted accessResearch articleFirst published February, 2025

The effect of crystallinity on fatigue properties of glass fiber reinforced poly (ether ether ketone) composite materials

Huaming Xie, Xinghe Gu, Jianan Yao [...]

Journal of Composite Materials

Restricted accessResearch articleFirst published July, 2018

Influence of the microstructure on the subsurface and surface damage during lubricated rolling–sliding wear of sintered and sinterhardened 1.5%Mo–2%Cu–0.6%C steel: Theoretical analysis and experimental investigation

Samuel Tesfaye Mekonone, Wolfgang Pahl, Alberto Molinari

Powder Metallurgy

Restricted accessResearch articleFirst published 2025

The influence of chemical composition optimisation of advanced high-strength steel on liquid metal embrittlement phenomenon

Xue Bai, Yun Han, Guangrui Jiang [...]

Ironmaking & Steelmaking: Processes,Products and Applications

Open accessResearch articleFirst published September, 2025

Nanostructure characterisation of welded polyethylene using small angle X-ray scattering

Ebrahim Oromiehie, Adrian Kong, Luke Djukic [...]

Journal of Reinforced Plastics and Composites

Restricted accessResearch articleFirst published February, 2022

Retrieval analysis of neck fracture on uni-modular total hip arthroplasty stems: The contributions of material processing and stem design

Patricia O Cubillos, Vinícius O dos Santos, Daniel A Fernandes [...]

Proceedings of the Institution of Mechanical Engineers,Part H: Journal of Engineering in Medicine

Restricted accessResearch articleFirst published May, 2013

Influence of strain rate on hot ductility of austenitic stainless steel slab

G Q Hou, L Zhu

Materials Science and Technology

Restricted accessResearch articleFirst published September, 2010

Numerical Simulation of Multiple Cracking in ANSI 304 Stainless Steel Under Thermal Fatigue

Hai Qing, Wei Yang, Jian Lu

International Journal of Damage Mechanics

Restricted accessResearch articleFirst published October, 2013

Acoustic emission assisted fracture zone analysis of cellulose fibre materials

P Isaksson, R Hägglund

Journal of Composite Materials

Restricted accessResearch articleFirst published January, 1980

Weldability and hot cracking in thorium-doped iridium alloys

S. A. David, C. T. Liu

Materials Science and Technology

Restricted accessResearch articleFirst published March, 2012

Effect of temperature on impact properties and microstructural evolution of twinning induced plasticity steel

D Z Li, Y H Wei, L F Hou [...]

Materials Science and Technology

Restricted accessResearch articleFirst published February, 2025

The effect of crystallinity on fatigue properties of glass fiber reinforced poly (ether ether ketone) composite materials

Huaming Xie, Xinghe Gu, Jianan Yao [...]

Journal of Composite Materials

Restricted accessResearch articleFirst published July, 2018

Influence of the microstructure on the subsurface and surface damage during lubricated rolling–sliding wear of sintered and sinterhardened 1.5%Mo–2%Cu–0.6%C steel: Theoretical analysis and experimental investigation

Samuel Tesfaye Mekonone, Wolfgang Pahl, Alberto Molinari

Powder Metallurgy

Restricted accessResearch articleFirst published 2025

The influence of chemical composition optimisation of advanced high-strength steel on liquid metal embrittlement phenomenon

Xue Bai, Yun Han, Guangrui Jiang [...]

Ironmaking & Steelmaking: Processes,Products and Applications

Open accessResearch articleFirst published September, 2025

Nanostructure characterisation of welded polyethylene using small angle X-ray scattering

Ebrahim Oromiehie, Adrian Kong, Luke Djukic [...]

Journal of Reinforced Plastics and Composites

Restricted accessResearch articleFirst published February, 2022

Retrieval analysis of neck fracture on uni-modular total hip arthroplasty stems: The contributions of material processing and stem design

Patricia O Cubillos, Vinícius O dos Santos, Daniel A Fernandes [...]

Proceedings of the Institution of Mechanical Engineers,Part H: Journal of Engineering in Medicine