Sage Journals: Discover world-class research

Retricted access

Research article

First published 2025-4

Microstructure and properties of the as-cast alumina-forming austenitic steel during cold-rolling

Fujian Zhang, Shuai Xu, Hao Wang [...]

Materials Science and Technology

Free access

Research article

First published 2022-8

Investigation of over-bending defect in the cold roll forming of U-channel section using experimental and numerical methods

Behrooz Shirani Bidabadi, Hassan Moslemi Naeini, Rasoul Safdarian [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2001-4

Modelling of cold roll forming of steel strip

Han Z.-W., Ren L.-Q., C. Liu [...]

Materials Science and Technology

Retricted access

Research article

First published 2002-11

Stress and strain analysis for multiple cold rolls progressive forming of channel section with outer edge

Z.-W. Han, C. Liu, L.-Q. Ren [...]

Materials Science and Technology

Retricted access

Research article

First published 2026

Study on the influence mechanism of asynchronous cold-formed forming on torsional defects of porous C-section strip

Yufei Zhao, Yi Han, Yao Xiao [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2016-11

Novel cold-rolled martensitic ultra-high-strength steels for roll forming technologies

T. Taylor

Materials Science and Technology

Retricted access

Case report

First published 2019-11

Forming-limit strains of perforated steel sheets under biaxial stress state

Ryoichi Chiba, Ryo Nakamura, Yumika Suga

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2021-1

The influence of post-annealing and ultrasonic vibration on the formability of multilayered Al5052/MgAZ31B composite

D. Rahmatabadi, M. Tayyebi, N. Najafizadeh [...]

Materials Science and Technology

Retricted access

Research article

First published 2025-5

Effects of annealing temperature on the formability,mechanical and interface properties of laminated metal composite STS304L/Al1050/STS430

Fabrício Pertile, Samyr Ismail, Leonardo M Leidens [...]

Journal of Composite Materials

Retricted access

Research article

First published 2024-10

Predictive modeling of spring-back in pre-punched sheet roll forming using machine learning

Ali Zeinolabedin-Beygi, Hassan Moslemi Naeini, Hossein Talebi-Ghadikolaee [...]

The Journal of Strain Analysis for Engineering Design

Search results