Sage Journals: Discover world-class research

Retricted access

Research article

First published 2012-8

Effect of Si content in hot dipping aluminium bath on Al–Fe bonding layer of aluminium piston with reinforced cast iron ring

C A Li, J Xiong, L Sun [...]

Materials Science and Technology

Retricted access

Research article

First published 2021-6

Wear behavior of pits textured grey cast iron rings with Zr/ZrN coatings under dry sliding

Risheng Long, Shaoni Sun, Youwei Zhang

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2021-8

The influence of initial deflection angle on the tribological properties of gray cast iron rings with curve distributed pits under dry sliding

Shaoni Sun, Risheng Long, Yimin Zhang [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2007-3

Investigation of fundamental wear mechanisms at the piston ring and cylinder wall interface in internal combustion engines

P Papadopoulos, M Priest, W. M. Rainforth

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 1990-1

Fabrication,Microstructure,and Wear of Al-10.6Si Laser Surface Alloyed with Additional Silicon

W. J. Tomlinson, J. R. McAra, A. S. Bransden

Surface Engineering

Retricted access

Research article

First published 2021-4

Effects of angle formation between melted zone and friction direction on thermal fatigue and wear resistance of truck drum brake

Dahui Yu, Ti Zhou, Hong Zhou [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Retricted access

Research article

First published 2017-1

Quantitative comparison of tribological performance of chromium- and zinc-phosphate-coated piston rings in tribotest rig

Doğuş Özkan, Hakan Kaleli, Levent Yüksek

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2005-4

Wear response of crystalline nanocomposite and glassy Al 2 O 3 -SiC coatings subjected to simulated piston ring/cylinder wall tests

P A Dearnley, E Kern, K L Dahm

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 1960-1

Measurement of Piston-Ring and Cylinder-Liner Wear Using Radioactive Tracers

R. F. Pywell, S. T. Walker

Proceedings of the Institution of Mechanical Engineers: Automobile Division

Retricted access

Research article

First published 1934-6

The Operating Temperatures of Cast Iron and Aluminium Pistons in a 12-Inch Bore Oil Engine

H. Wright Baker

Proceedings of the Institution of Mechanical Engineers

Search results