Sage Journals: Discover world-class research

Retricted access

Research article

First published 2021

Drilling performance of uncoated brad spur tools for high-strength carbon fiber-reinforced polymer laminates

Tieyu Lin, Jinyang Xu, Min Ji [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Free access

Research article

First published 2015

An experimental investigation on cutting-induced damage when drilling high-strength T800S/250F carbon fiber–reinforced polymer

Jinyang Xu, Qinglong An, Ming Chen

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2018-5

Comparisons of the use of twist,pilot-hole and step-drill on influence of carbon fiber-reinforced polymer drilling hole quality

Gong-Dong Wang, Melly S Kirwa

Journal of Composite Materials

Retricted access

Research article

First published 2017-10

Carbon fiber-reinforced polymer composite drilling via aluminum chromium nitride-coated tools: Hole quality and tool wear assessment

Muhammad Harris, Muhammad Asif Mahmood Qureshi, Muhammad Qaiser Saleem [...]

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2019-6

Development of a longitudinal–torsional ultrasonic vibration-aided drilling system for drilling carbon fiber-reinforced polymer materials

Xiaobo Wang, Feng Jiao, Dong Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2015-5

Analysis of hole wall defects of drilled carbon fiber reinforced polymer laminates

Soraya Catche, Robert Piquet, Frédéric Lachaud [...]

Journal of Composite Materials

Retricted access

Research article

First published 2019-4

Investigation of delamination and surface quality of machined holes in drilling of multiwalled carbon nanotube doped epoxy/carbon fiber reinforced polymer nanocomposite

Dhiraj Kumar, KK Singh

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Free access

Review article

First published 2026

Laser drilling and cutting of carbon fiber reinforced polymers: Parameter selection and intelligent optimization – A review

Peiyan Cong, Siqi Liu, Jie Luo [...]

Journal of Thermoplastic Composite Materials

Retricted access

Research article

First published 2025-8

Drilling of carbon fiber reinforced polymer without support and using support plates with different properties

Gültekin Basmacı, Veli Çelikyürek, Uğur Köklü [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2021-9

Delamination and hole wall roughness evaluation in air-cooled drilling of carbon fiber-reinforced polymer

Nícholas Hoffmann, Gabriel SC Souza, André J Souza [...]

Journal of Composite Materials

Search results