Sage Journals: Discover world-class research

Free access

Research article

First published 2004-1

Prediction and reduction of process times for the PC-based computer numerically controlled drilling machine

G C Onwubolu, S Kumar

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2023-07

Effects of machining parameters on H13 die steel using CNC drilling machine

Hariharan KB, Vijayalakshmi S, Navaneethakrishnan G [...]

Composites and Advanced Materials

Free access

Research article

First published 2004-11

Modelling and simulation of a PC-based computer numerically controlled drilling machine worktable

P Chand, G C Onwubolu, S Kumar

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2002-11

Development of a PC-based computer numerical control drilling machine

G C Onwubolu, S Aborhey, R Singh [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2006-12

Developing a tapping and drilling measurement system for a performance test using a laser diode,position-sensing detector,and laser interferometer

Wenyuh Jywe, Chun-Jen Chen

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Other

First published 2011-3

Influence of drill geometry on thrust force in drilling GFRP composites

B. Latha, V.S. Senthilkumar, K. Palanikumar

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2024-10

Investigating drilling characteristics of stir-squeeze cast Al6082 composites reinforced with MWCNTs

Madhusudan Baghel, Chimata Murali Krishna, Ashish Kumar [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2021-4

Optimization of input machining parameters in SBCNC-60 for turning and drilling on P8 (H-13,HSS) material

Arti Saxena, YM Dubey, Manish Kumar [...]

International Journal of Electrical Engineering & Education

Retricted access

Research article

First published 2019-6

Multi-shaped tool wear study during rotary ultrasonic drilling and conventional drilling for amorphous solid

A Sharma, V Jain, D Gupta

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2005-08

Machining of Fiber-reinforced Thermoplastics: Influence of Feed and Drill Size on Thrust Force and Torque during Drilling

N. S. Mohan, A. Ramachandra, S. M. Kulkarni

Journal of Reinforced Plastics and Composites

Search results