Sage Journals: Discover world-class research

Retricted access

Research article

First published 2009-12

Fatigue crack growth behaviour of 4130X steel in H 2 S environment

Y. L. Zhang, W. Miao, Z. Y. Sun [...]

Corrosion Engineering,Science and Technology: The International Journal of Corrosion Processes and Corrosion Control

Retricted access

Research article

First published 2001-3

Influence of crack speed on fracture energy in amorphous and rubber toughened amorphous polymers

C. Fond, R. Schirrer

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2013-8

X-ray microtomography for characterisation of cracks in iron ore pellets after reduction

E Hjortsberg, F Forsberg, G Gustafsson [...]

Ironmaking & Steelmaking: Processes,Products and Applications

Retricted access

Research article

First published 2014-7

A procedure for multiple crack identification in beam-like structures from natural vibration mode

Nguyen Tien Khiem, Hai Thanh Tran

Journal of Vibration and Control

Retricted access

Research article

First published 2006-4

Analysis of the Disbond Effect on the Stress Intensity Factor Variation for Repaired Cracks with Bonded Composite Patch

A Amiri, B Bachir Bouiadjra, B Serier [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2012

Prediction of Potential Cracking Failure Modes in Three-Dimensional Airfield Rigid Pavements with Existing Cracks and Flaws

Francisco Evangelista, Jeffery R. Roesler, C. Armando Duarte

Transportation Research Record: Journal of the Transportation Research Board

Retricted access

Research article

First published 2019-3

Numerical and experimental investigation of damage severity estimation using Lamb wave–based imaging methods

Asaad Migot, Yeasin Bhuiyan, Victor Giurgiutiu

Journal of Intelligent Material Systems and Structures

Retricted access

Research article

First published 1980-8

Crack growth behaviour of structural materials in high-temperature water environments

T. A. Prater, F. P. Ford, L. F. Coffin

Materials Science and Technology

Retricted access

Research article

First published 2017-4

Development and validation of a leak before break criterion for cylindrical pressure vessels

P Kannan, KS Amirthagadeswaran, T Christopher

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2011-5

Fatigue life prediction of bonded rubber components at elevated temperature

S Asare, J J C Busfield

Plastics,Rubber and Composites: Macromolecular Engineering

Search results