Sage Journals: Discover world-class research

Retricted access

Research article

First published 2021

Tribological Characteristics of Thermomechanically Processed 7075 Al Alloy Through Nano-scratch Characterization

Souriddha Sanyal, Ashoktaru Chakraborty, Angshuman Sarkar [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2020

Influence of dielectric conductivity on corner error in wire electrical discharge machining of Al 7075 alloy

Kingshuk Mandal, Mukandar Sekh, Dipankar Bose [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2017-7

Effect of Al 2 O 3 nanoparticle reinforcement on the mechanical and high-temperature tribological behavior of Al-7075 alloy

Yaping Bai, Yongchun Guo, Jianping Li [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2001-6

Grain structure of laser remelted 7075 aluminium alloy in presence of Al 2 O 3 particles

K. Zhang, G.N. Chen

Materials Science and Technology

Retricted access

Research article

First published 2017-12

Investigation of nickel metal powder on tribological and mechanical properties of Al-7075 alloy composites for gear materials

Ashiwani Kumar, Amar Patnaik, I. K. Bhat

Powder Metallurgy

Retricted access

Research article

First published 2023-11

Optimization of dry sliding wear parameters through RSM approach of fine-grained 7075 Al alloy developed by MAC

Aditya Prakash Yadav, Aditya Kumar Padap

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2018-1

Interfacial microstructure and strengthening mechanism in Ti–6Al–4V reinforced Al-7075 alloy

Jianian Hu, Guoqiang Luo, Jian Zhang [...]

Materials Science and Technology

Retricted access

Research article

First published 2001-2

Properties of as welded and heat treated pure titanium–7075 Al–Zn–Mg alloy friction weld joints

A. Fuji, K. Ameyama, H. Kokawa [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2007-3

In situ laser cladding of Al 2 O 3 bearing coatings on aluminium alloy 7075 for improvement of wear resistance

T. M. Yue, K. J. Huang, H. C. Man

Surface Engineering

Retricted access

Research article

First published 2019-7

Effect of different temperatures on the fatigue behavior of interference fitted plates of Al-alloy 7075-T6

H Taghizadeh, TN Chakherlou

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Search results