Sage Journals: Discover world-class research

Retricted access

Research article

First published 2018-11

Friction stir welding of thick section reduced activation ferritic–martensitic steel

Vijaya L. Manugula, Koteswararao V. Rajulapati, G. Madhusudhan Reddy [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2024-9

Evaluation of metallurgical and mechanical properties of 12 mm thick aerospace grade MDN 250 steel by plasma ARC welding technique

R Arunprakash, M Manikandan

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2022-08

An experimental and finite element analysis of 3D printed honeycomb structures under axial compression

Serdar Kaveloglu, Semsettin Temiz

Polymers and Polymer Composites

Retricted access

Research article

First published 1998-12

Non-destructive measurement of residual stresses in carbon steel weld joints

A. Joseph, P. Palanichamy, S. K. Rai [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2012-5

Permanent magnet linear synchronous motor with high air-gap flux density for transportation

Mitusnobu Terata, Nobuo Fujii

International Journal of Applied Electromagnetics and Mechanics

Retricted access

Research article

First published 2012-3

Ultrasonographic Evaluation of Low Energy Extracorporeal Pulse Activated Therapy (EPAT) for Chronic Plantar Fasciitis

Robert Gordon, Charles Wong, Eric J. Crawford

Foot & Ankle International

Retricted access

Research article

First published 2008-12

Experimental investigations for reducing wall thickness in zinc shell casting using three-dimensional printing

M Kaplas, R Singh

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2009-9

Investigations for a statistically controlled rapid casting solution of lead alloys using three-dimensional printing

J P Singh, R Singh

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 1983-07

Error Analysis for the National Bureau of Standards 1016 mm Guarded Hot Plate*

B. Rennex

Journal of Building Physics

Retricted access

Research article

First published 2009-7

Investigation of microstructure,surface and subsurface characteristics in titanium alloy friction stir welds of varied thicknesses

P. D. Edwards, M. Ramulu

Science and Technology of Welding and Joining

Search results