24:I[63208,["8920","static/chunks/8920-efbff8517d590b7e.js","9097","static/chunks/9097-7e60ff382fede0de.js","5914","static/chunks/5914-356082358a498a0b.js","9903","static/chunks/9903-11222066602aad8e.js","5438","static/chunks/5438-cfc6cd3ec63ed58c.js","3851","static/chunks/3851-d9d99b9df58ccefb.js","4621","static/chunks/4621-60797c2425663d2a.js","6871","static/chunks/6871-85cb03c97585f46a.js","6736","static/chunks/6736-932312a004c99faf.js","4550","static/chunks/4550-0bf059e3050c08b3.js","688","static/chunks/688-a6a2ac7bff269cd3.js","3984","static/chunks/3984-063c0b62f32133c7.js","7038","static/chunks/7038-4f87670d4e55ef18.js","9039","static/chunks/9039-75366c62dc7d0d0e.js","4563","static/chunks/4563-ad980d1babbf7b0b.js","6761","static/chunks/6761-0c10d1446de7ae1c.js","744","static/chunks/744-1e76229abb9e297b.js","7342","static/chunks/7342-1586df78600bf911.js","3617","static/chunks/3617-1f62a097637f4747.js","5895","static/chunks/5895-caa6c774914eb108.js","7481","static/chunks/7481-3b84c503a2ebfb3f.js","3668","static/chunks/3668-7dab69e4121c33af.js","39","static/chunks/39-e93a27d0920e6d92.js","2881","static/chunks/2881-445cc2384af2c6f9.js","2364","static/chunks/2364-e83d52fb21729d99.js","3208","static/chunks/3208-e65462d166bd3688.js","7582","static/chunks/app/toc/%5Btla%5D/%5Bvolume%5D/%5Bissue%5D/page-694a0e465c2c1334.js"],"default"] 25:T553,

Experiments were conducted to characterize the mechanical behavior of Divinycell PVC foams over a wide range of environmental temperatures, from −60 to +80°C. Transversely isotropic properties of the foams, including modulus, strength, and ductility, were found to vary with temperatures between the ductile-to-brittle transition temperature (−60 to −50°C) and just under the glass transition temperature (95 to 100°C). The elastic modulus and yield strength decreased linearly as the temperature increased from −60 to +80°C. Compressive strength also decreased steadily with increasing temperature over the entire temperature range. In contrast, tensile and shear strengths only showed a significant decrease in values as the temperature rose above 23°C (room temperature). Below 23°C, there was a minor change in tensile and shear strengths. Tensile and shear ductility decreased sharply as the temperature decreased from +80°C to −40°C and stabilized between −60 and −40°C, which is close to the ductile-to-brittle transition region. Fractography of the tensile and shear fracture surfaces confirmed brittle fracture at −60°C and ductile tearing at +60°C. Equations were derived to predict modulus, yield strength, compressive, tensile and shear strengths, and ductility at any temperature in terms of room temperature values.

26:T51a,

In this work, we used a 3D scanner for the volume measurement of foamed samples, a long-standing problem in the density evaluation of foams. The 3D scanning density measurement method can be selected as an alternative to or in combination with well-established, classical methods that involve the use of instruments like a caliper, a pycnometer, or other devices based on displacement or flotation principles. In particular, the classical methods show some limitations when the foamed sample geometry is irregular, when the polymer is highly hygroscopic, and when it has open porosities. We have tested numerous foamed samples of different sizes, shapes, densities, materials, and morphologies. We utilized different 3D scanner configurations for their volume measurement and compared the results with geometrical and displacement methods, when possible. Results showed that the proposed method is highly accurate, reproducible, and simple, although some specific precautions should be put in place to avoid misinterpretation by the shape-reconstructing software.

Graphical Abstract

27:T624,