An innovative method to teach undergraduate courses in high-voltage test technology is presented in this paper. The method splits the impulse voltage test into two parts; one is the traditional physical way for high-voltage measurement, and the other is software simulation on a virtual platform. The virtual platform is designed with macromedia and programmed with C language. Probability theories have been introduced to establish its mathematic model. Then verification is presented of the validity of the simulation.
KoretskyMilo D.AmatoreDanielleBarnesC. and KimuraS., ‘Enhancement of student learning in experimental design using a virtual laboratory’, IEEE Trans. Educ., 51(1) (2008), 76–85.
2.
SutharJ. L.LaghariJ. R. and SaluzzoT. J., ‘Usefulness of SPICE in high voltage engineering education’, IEEE Trans. Power Syst., 6(3) (1991), 1272–1278.
3.
DuarteMichaelButzBrian P.MillerSusan M. and MahalingamAnnapoorna, ‘An intelligent universal virtual laboratory (UVL)’, IEEE Trans. Educ., 51(1) (2008), 2–9.
4.
RichardsonJeffreyAdamo-VillaniNicolettaCarpenterEdward and MooreGeorge, ‘Designing and implementing a virtual 3D microcontroller laboratory environment’, in Proc. 36th Annual Frontiers in Education Conference, San Diego, CA, 28–31 Oct. 2006 (IEEE, Piscataway, NJ), pp. 1–5.
5.
KarmakearS.RoyN. K. and KumbhakarP., ‘ICT enabled high voltage laboratory: Cost effective tool for engineering education’, in Proc. 2009 Third International Conference on Power Systems, Kharagpur, India, 27–29 Dec., 2009 (IEEE, Piscataway, NJ, 2009), pp. 1–6.
6.
MarinS. L. T.GarciaF. J. B.TorresR. M.VazquezS. G. and MorenoA. J. L., ‘Implementation of a web-based educational tool for digital signal processing teaching using the technological acceptance model,’IEEE Trans. Educ., 48(4) (2005), 632–641.
7.
ShaabanM., ‘A visual simulation environment for teaching power system stability’, Int. J. Elect. Enging Educ., 47(4) (2010), 357–374.
8.
NgalamousL. and MyersL., ‘A Macromedia Flash-based teaching aid for digital electronic tutoring’, Int. J. Elect. Enging Educ., 47(2) (2010), 104–119.
9.
‘Guide on high-voltage testing techniques — Part 1: General’, IEC Std. No. 60–1:1989, pp 3, 20.
10.
BushV. and MoonP. H., ‘A precision measurement of puncture voltage’, Trans. Amer. Inst. Elec. Eng., XLVI (1927), 1025–1038.
11.
FengHuoQifaWanWeiHuTaoXu and LiangXie, ‘Long wave-front impulse voltage test of UHV air-gaps with multistage method and result statistics’, High Voltage Engineering, 37(9) (2011), 2171–2177 (in Chinese).
12.
BrownG. W., ‘Determination of critical flashover voltage and standard deviation from flashover probability data’, IEEE Trans. PAS, 88 (1969), 189–194.
13.
AlexsandrovG. N. and IvanovV. L., ‘Electrical strength of air gaps and insulator strings under the action of switching surges’, Elec. Technol. (USSR), 3 (1962), 460–474.
14.
GuykerW. C.HilemanA. R. and WittibschlagerJ. F., ‘Full scale tests for the Allegheny power system 500 KV tower insulation system’, IEEE Trans. PAS, 85 (1966), 614–623.
15.
VibholmS. and ThyregodP., ‘The analysis of insulation breakdown probabilities by the up-and-down method’, IEEE Trans. Electrical Insulation, Vol. EI-21, No.2, pp. 133–134.
