A prototype application for a communication network between the controller and the sensors in a laboratory plant for teaching purposes using the controller area network (CAN) standard is discussed in detail in this paper. The basis of the CAN digital communication system is revised and results are presented of the designed experiment, carried out by the students, to control the tank level. It is concluded that the introduction of modern communication technology in teaching process control as part of the electrical engineering curriculum is feasible.
BoshR., CAN Specification, ver. 2.0, (GmbH, Stuttgart, 1991), pp. 33–68.
3.
KremerP., ‘Study of the CAN communication protocol for applications in distributed digital control processes’ (in Spanish), Electrical Engineering Thesis, Department of Electrical Engineering, University of Chile, October 1998.
4.
82527 Serial Communications Controller Architectural Overview (Intel, 1996), pp. 3–37, available at http://www.intel.com/design.
5.
PCA82C250 CAN Controller Interface, (Philips Semiconductors, 1997), available at http://www.philips.com.
6.
PCCAN The CAN Card For PC Computers, ver. 1.0B (Kvaser, Sweden, 1997), available at http://www.kvaser.se.
7.
OgataK., Modern Engineering Control, second edition (Prentice Hall, Englewood Cliffs, 1993), pp. 634–646.
