Since the LICON methodology was first developed in the late 1990s to predict the long term creep rupture behaviour of new generation martensitic 9% Cr steels from the results of relatively short duration multi-axial specimen tests, there have been a number of necessary refinements to this originally simple concept. These are reviewed.
AuerkariP.HoldsworthS.R.RantalaJ.H.HurstR.C.CoussementC. and HackR., Predicting long term behaviour using the LICON methodology, in: Proc. 3rd Conf. on Advances in Materials Technology for Fossil Power Plants, Univ. Wales, Swansea, 2001, pp. 329–339.
2.
Mendes-MartinsV. and HoldsworthS.R., The LICON methodology for predicting the long term service behaviour of new steels, Mater. High Temp.19(2) (2002), 99–104.
3.
HoldsworthS.R. and MazzaE., Exploring the applicability of the LICON methodology for a 1%CrMoV rotor steel, Mater. High Temp.25(4) (2008), 267–276.
4.
HoldsworthS.R. and MazzaE., Using the results of creep crack incubation tests on CrMoV steel for predicting long time creep rupture properties, Int. J. Press. Vessels Pip.86(12) (2009), 838–844.
5.
HosseiniE.HoldsworthS.R. and MazzaE., Experience with using the LICON methodology for predicting long term creep behaviour in materials, Int. J. Press. Vessels Pip.92 (2012), 70–76.
6.
HosseiniE.HoldsworthS.R. and MazzaE., The LICON methodology for predicting the long time uniaxial creep rupture strength of materials, Int. J. Press. Vessels Pip.111–112 (2013), 27–35.
7.
HosseiniE.HoldsworthS.R. and MazzaE., Exploring the applicability of the LICON methodology for the creep assessment of a dissimilar metal weld, Int. J. Press. Vessels Pip.111–112 (2013), 162–172.
8.
RantalaJ.AuerkariP.SalonenJ.HolmströmS.LaukkanenA. and SaukkonenT., Mechanical performance and life prediction for canister copper, Technical report, VTT Technical research, Centre of Finland, 2010.
9.
SpeicherM.HobtA. and KlenkA., Creep rupture determination based on creep deformation, in: Proc. ECCC Conf. on Creep & Fracture, Rome, 2014.
10.
CaneB.J., Creep cavitation and rupture in 2¼CrMo steel under uniaxial and multiaxial stresses, in: Proc. Conf. on Mechanical Behaviour of MaterialsMillerK.J. and SmithR.F., eds, Pergamon Press, Oxford, 1979, pp. 179–182.
11.
WebsterG.A.HoldsworthS.R.LovedayM.S.NikbinK.PerrinI.J.PurperH.SkeltonR.P. and SpindlerM.W., A code of practice for conducting notched bar creep tests and for interpreting the data, Fatigue Fract. Eng. Mater. Struct.27 (2004), 319–342.
12.
HoldsworthS.R., Initiation and growth of creep cracks from pre-existing defects, Mater. High Temp.10(2) (1992), 127–137.
13.
ASTM E1457, Standard test method for measurement of creep crack growth times and rates in metals, in: Annual Book of ASTM Standards, Vol. 03.01.
14.
MillerA.G., Review of limit loads of structures containing defects, Int. J. Press. Vessels Pip.32 (1988), 191–327.
15.
GoochD.J.HoldsworthS.R. and McCarthyP.R., The influence of net section area on the notched bar creep rupture lives of three power plant steels, in: Proc. 3rd Intern. Conf. on Creep and Fracture of Engineering Materials and Structures, Swansea, IOM, 1987, pp. 441–457.
16.
NIMS Creep Property Data Sheets, National Research Institute for Metals, Tokyo, Japan.
17.
EhrhardtF.HoldsworthS.R.KühnI. and MazzaE., Creep-fatigue crack development in dissimilar metal welded joints between steels and a nickel base alloy, Mater. Res. Innovations17(5) (2013), 327–331.
