Effect of task factors on the heart rate recovery time in a lifting task

Abstract

BACKGROUND

There is an extensive body of research reviewing the effect of task factors on the Maximum Acceptable Weight of Lift (MAWL) or heart beats elevation as a result of a manual material handling task. However, there are now studies that investigate the effect of task factors on the heart rate recovery time (HRR).

OBJECTIVE

The purpose of the study was twofold: (1) to determine the HRR for a series of lifting tasks based on the activity heart rate and by using a set of task variables, (2) to compare the effect of three task factors on the HRR following a lifting task.

METHODS

This research was constituted of capturing the duration that heart rate needs to get to a steady state following a lifting task, along with conducting the survey of perceived exertion (Borg). Three independent variables of this study (task-factors) were weight of the lift (10 and 20 kg), frequency of the lift (6 and 9 lifts per minute), and the duration of the lift (5 and 10 minutes). Given the possible treatment combinations, a total of 8 treatments was obtained. Twenty-four university male students performed the lifting tasks in a between-subject design. Each participant performed one treatment by lifting a box from knuckle to shoulder height at a certain frequency, duration and weight. All eight treatments were equally replicated with three observations per treatment group.

RESULTS

Increasing weight and frequency of the lift significantly increased the HRR (respectively by 37% and 34%), while the HRR had a slight decrease when duration was doubled (approximately $-$ 2.7%). Weight of the lift was the only factor led to a significant change in the perceived difficulty of the task among participants (approximately 20%).

CONCLUSIONS

Among main factors, frequency and weight of the lift had a significant effect on the HRR (p-values $<$ 0.1). Among the interaction effects, the interaction of frequency and duration had a significant effect on the HRR. The only factor that had a significant effect on the Borg-rating was weight of the lift (p-value $<$ 0.1).

Keywords

MMH lifting task recovery time exertion

Get full access to this article

View all access options for this article.

References

Occupational Safety and Health Administration [OSHA]. (2000). Ergonomics: The Study of Work. Retrieved from https://www.osha.gov/Publications/osha3125.pdf.

Gatchel

R. J.

, and Schultz

I. Z.

(2014). Handbook of musculoskeletal pain and disability disorders in the workplace: New York, NY: Springer, 2014.

Centers for Disease Control and Prevention(CDC), (2016). Work-Related Musculoskeletal Disorders (WMSDs) Evaluation Measures. Retrieved from https://www.cdc.gov/workplacehealthpromotion/health-strategies/musculoskeletal-disorders/evaluation-measures/index.html.

Occupational Safety and Health Administration [OSHA]. (2015). 2014. Prevention Of Work-Related Musculoskeletal Disorders [Fact sheet]. Retrieved from https://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=UNIFIED_AGENDA&p_id=%204481.

U.S. Bureau of Labor Statistics (BLS) (2015.) Nonfatal Occupational Injuries And Illnesses Requiring Days Away From Work, 2014 [Fact sheet]. Retrieved from https://www.bls.gov/news.release/archives/osh2_11192015.pdf.

U.S. Bureau of Labor Statistics (BLS) (2016.) Nonfatal Occupational Injuries and Illnesses Requiring Days Away from Work, 2015 [Fact sheet]. Retrieved from https://www.bls.gov/news.release/osh2.nr0.htm.

Dias

J. J.

, and Garcia-Elias

(2006). Hand injury costs. Injury, 37, 1071–1077. doi: 10.1016/j.injury.2006.07.023.

Sadeghniiat-Haghighi

, and Yazdi

(2015). Fatigue management in the workplace. Industrial Psychiatry Journal, 24(1), 12–17, doi: 10.4103/0972-6748.160915.

Loisel

, and Anema

J. R.

(2013). Handbook of work disability. [electronic resource]: prevention and management. New York, NY: Springer, c2013.

10.

Iridiastadi

, and Aghazadeh

(2005). Physiological fatigue limit of combined manual materials handling tasks. Occupational Ergonomics, 5(3), 141–148.

11.

Snook

S. H.

, and Ciriello

V. M.

(1991). The design of manual handling tasks: revised tables of maximum acceptable weights and forces. Ergonomics, 34(9), 1197–1213. doi: 10.1080/00140139108964855.

12.

Verbeek

J. H.

, Martimo

, Kuijer

P. M.

, Karppinen

, Viikari-Juntura

, and Takala

(2012). Proper manual handling techniques to prevent low back pain, a Cochrane systematic review. Work (Reading, Mass.), 41 Suppl 12299-2301. doi: 10.3233/WOR-2012-0455-2299.

13.

Andersson

G. B. J.

(1999). Epidemiological features of chronic low-back pain. Lancet, 354(9178), 581–585.

14.

Powell

R. I.

, and Copping

A. G.

(2016). Measuring fatigue-related impairment in the workplace. Journal of Engineering, Design and Technology, 14(3), 507–525. doi: 10.1108/JEDT-09-2014-0063.

15.

Janaro

R. E.

, and Bechtold

S. E.

(1985). A study of the reduction of fatigue impact on productivity through optimal rest break scheduling. Human Factors, 27(4), 459–466.

16.

Katic

, Ivanisevic

, Lalic

, Tasic

, and Penezic

(2013). Effects of fatigue to operational productivity with employees. Metalurgia International, 18, 170–176.

17.

Belenky

, Lamp

, Hemp

, and Zaslona

J. L.

(2014). Fatigue in the workplace, in: Sleep deprivation and disease: Effects on the body, brain and behavior. M. T. Bianchi and M. T. Bianchi, Eds, New York, NY, US: Springer Science

+

Business Media. pp. 243–268.

18.

Bhatia

, and Murrell

K. F.

(1969). An industrial experiment in organized rest pauses. Human Factors, 11(2), 167–174.

19.

Enoka

R. M.

, and Duchateau

(2008). Muscle fatigue: what, why and how it influences muscle function. Journal of Physiology (Oxford), 586(1), 11–23.

20.

Lerman

S. E.

, Eskin

, Flower

D. J.

, George

E. C.

, Gerson

, Hartenbaum

, Moore-Ede

et al. (2012). Fatigue risk management in the workplace. Journal of Occupational and Environmental Medicine/American College of Occupational and Environmental Medicine, 54(2), 231–258. doi: 10.1097/JOM.0b013e318247a3b0.

21.

Aghazadeh

(1986). Dynamic strength models for manual handling of different containers. Journal of Human Ergology, 15(2), 131–138.

22.

Borg

G. A.

(1982). Psychophysical bases of perceived exertion. Medicine and Science in Sports and Exercise, 14(5), 377–381.

23.

Aghazadeh

, Waly

S. M.

, and Santoso

D. S.

(1998). Models for lifting load capacity of Indonesian population. Occupational Ergonomics, 1(1), 67–74.

24.

Pulat

B. M.

(1997). Fundamentals of industrial ergonomics. Prospect Heights, IL: Waveland.

25.

Brouha

(1967). Physiology in industry; evaluation of industrial stresses by the physiological reactions of the worker: Oxford, New York, Pergamon Press [1967, c1960] 2d ed.

26.

Garg

, and Banaag

(1988). Maximum acceptable weights, heart rates and RPEs for one hour's repetitive asymmetric lifting. Ergonomics, 31(1), 77–96. doi: 10.1080/00140138808966650.

27.

S. P.

(1997). Maximum acceptable weight of lift by Chinese experienced male manual handlers. Applied Ergonomics, 28(4), 237–244.

28.

Maiti

, and Bagchi

T. P.

(2006). Effect of different multipliers and their interactions during manual lifting operations. International Journal of Industrial Ergonomics, 36(11), 991–1004. doi: https://dx.doi.org/10.1016/j.ergon.2006.08.00.

29.

Abadi

A. S. S.

, Mazlomi

, Saraji

G. N.

, Zeraati

, Hadian

M. R.

, and Jafari

A. H.

(2015). Effects of box size, frequency of lifting, and height of lift on maximum acceptable weight of lift and heart rate for male university students in Iran. Electronic Physician, 7(6), 1365–1371. doi: 10.14661/2015.1365.