An in-situ thermal behavior study was conducted on the metallic tantalum under two conditions. The experimentation was carried out on tantalum pellets which were heated progressively “underwent reaction and under continuous pumping or under controlled monoxide pressure” in a graphite resistance high temperature X-ray diffractometer up to 2300 K. Through the in-situ study, a thermodynamic analysis showed that this involved the formation of Ta2O, Ta2O5 (low temperature modification) and Ta2C likely to be formed between 293 and 2300 K, in agreement with a reaction mechanism that we established to occur in four stages.
KofstadP.High-temperature oxidation of titanium, Journal of the Less Common Metals12(6) (1967), 449–464.
2.
StringerJ.Reviews on High-Temperature Materials, Freund, Tel Aviv1973.
3.
CowgillM.G., StringerJ.The effect of oxygen pressure on the high temperature oxidation of tantalum, Journal of the Less Common Metals2(2-4) (1960), 233–240.
4.
ONGJ.N.JR, Oxidation of refractory metals as a function of pressure, temperature, and time: tungsten in oxygen, Journal of the Electrochemical Society109(4) (1962), 284.
5.
HansenM., AnderkoK.Constitution of Binary Alloys, McGraw-Hill Book Company, New York, 1958.
6.
VoitovichV.B., LavrenkoV.A., AdejevV.M.et al., High-temperature oxidation of tantalum of different purity, Oxidation of metals43 (1995), 509–526.
7.
AdelsbergL.M., PierreG.R., SpeiserR.Kinetics of the oxidation of tantalum by water vapor, Corning Glass Works, NY, 1967.
8.
RichardsK.J.The dehydration of gypsum. Part II: The oxidation kinetics of tantalum in carbon dioxide, Utah Univ Salt Lake City, 1962.
9.
RichardsK.J., WadsworthM.E.Oxidation Kinetics of Tantalum in Carbon Dioxide, Transactions of the Metallurgical Society of AIME230 (1964).
10.
BouzouitaK., DesmaisonJ.Oxidation mechanism of tantalum in carbon dioxide, Journal of alloys and compounds336(1-2) (2002), 270–279.
11.
ChrysanthouA., GrievesonP.The behaviour of tantalum in the presence of CO and CO/CO2 mixtures at elevated temperatures, Materials Science and Engineering: A194(1) (1995), L11–L14.
12.
ChandrasekharanR., ParkI.K., MaselR.I.et al., Thermal oxidation of tantalum films at various oxidation states from 300 to 700°C, Journal of Applied Physics98(11) (2005), 114908.
13.
KarP., WangK., LiangH.Oxidation of tantalum with mechanical force, Electrochemical and Solid State Letters11(2) (2007), C13.
14.
JinY., SongJ.Y., JeongS.H.et al., Thermal oxidation mechanism and stress evolution in Ta thin films, Journal of Materials Research25(6) (2010), 1080–1086.
15.
LahozR., EspinósJ.P., YuberoF.et al., In situ XPS studies of laser-induced surface nitridation and oxidation of tantalum, Journal of Materials Research30(19) (2015), 2967–2976.
16.
PialouxA., DodeM.Recherches aux rayons X à haute température, sur les réactions entre carboneet oxydes réfractaires, Revue Internationale des Hautes Temperatures et des Refractaires8(2) (1971), 155–160.
17.
StormsE.K.The Refractory Carbides, New York and London, 1967.
18.
ASTM Diffraction Files, Card N° 04 – 0788.
19.
ASTM Diffraction Files, Card N° 18 – 1302.
20.
ASTM Diffraction Files, Card N° 19 – 1298.
21.
ASTM Diffraction Files, Card N° 18 – 1296.
22.
ASTM Diffraction Files, Card N° 19 – 1300.
23.
TurkdoganE.T.Physical Chemistry of High Temperature Technology, Academic Press’inc, New York, 1980.
24.
KubaschewskiO., EvansE.La Thermochimie en métallurgie, Gauthier Villars, Paris, 1964.
25.
KofstadP., KrudtaaO.J.High temperature metallographic microscope studies of the initial oxidation of tantalum, Journal of the Less Common Metals5(6) (1963), 477–492.
26.
JiangA., YohannanA., NolimN.O., TysonT.A.et al., Investigation of the structure of β-tantalum, Thin Solid Films437(1-2) (2003), 116–122.
27.
ASTM Diffraction Files, Card N° 19 – 1290.
28.
MilosevicN.D., VukovicG.S., PavicicD.Z.et al., Thermal properties of tantalum between 300 and 2300 K, International Journal of Thermophysics20 (1999), 1129–1136.
29.
TakahashiY., NakamuraJ.I.The heat capacity of tantalum from 80 to 1000 K, Thermochimica acta282 (1996), 317–322.
30.
StavrevM., FischerD., WenzelC.et al., Crystallographic and morphological characterization of reactively sputtered Ta, TaN and TaNO thin films, Thin Solid Films307(1-2) (1997), 79–88.
31.
HolmbergB., DagerhamnT.X-ray studies on solid solutions of oxygen in a-zirconium, Acta Chem Scand15(4) (1961), 14.
32.
AlperA.M.High temperature oxides, Academic Press5(2), 1970.
33.
AfirA., AchourM., PialouxA.Etude de la reduction carbothermique du dioxyde de titane par diffraction X a haute temperature sous pression controlee, Journal of alloys and compounds210(1-2) (1994), 201–208.
34.
PialouxA., JoyeuxM.L., CizeronG.Étude du comportement du niobium sous vide par diffraction des rayonsX à haute température, Journal of the Less Common Metals87(1) (1982), 1–19.
35.
WellsA.F.Structural inorganic chemistry, Oxford university press, 2012.
36.
Van MeersscheM. and Feneau-DupontJ., Introduction à la cristallographie et à la chimie structurale, Oyez, 1976.
37.
TothL.E.Refractory materials, transition metal carbides and nitrides, Academic Press Inc., New York, 1971.
38.
HörzG., LindenmaierK., KlaissR.High-temperature solid solubility limit of carbon in niobium and tantalum, Journal of the Less Common Metals35(1) (1974), 97–105.
39.
WiesenbergerH., LengauerW., EttmayerP.Reactive diffusion and phase equilibria in the V– C, Nb– C, Ta– C and Ta– N systems, Acta Materialia46(2) (1998), 651–666.
40.
Lopez-De-La-TorreL., WinklerB., SchreuerJ.et al., Elastic properties of tantalum carbide (TaC), Solid State Communications134(4) (2005), 245–250.
41.
HansenM., AnderkoK., SalzbergH.W.Constitution of binary alloys, Journal of the Electrochemical Society105(12) (1958), 260C.
42.
LiermannH.P., SinghA.K., ManounB.et al., Compression behavior of TaC0.98 under nonhydrostatic and quasi-hydrostatic pressures up to 76GPa, International Journal of Refractory Metals and Hard Materials23(2) (2005), 109–114.
43.
BowmanA.L.The variation of lattice parameter with carbon content of tantalum carbide1, The Journal of Physical Chemistry65(9) (1961), 1596–1598.
44.
FukunagaA., ChuS., MchenryM.E.Synthesis, structure, and superconducting properties of tantalum carbide nanorods and nanoparticles, Journal of Materials Research13(9) (1998), 2465–2471.
45.
RavehA., DanonA., HayonJ.et al., Characterization of carburized tantalum layers prepared in inductive RF plasma, Thin Solid Films392(1) (2001), 56–64.
46.
KwonD.H., HongS.H., KimB.K.Fabrication of ultrafine TaC powders by mechano-chemical process, Materials Letters58(30) (2004), 3863–3867.
47.
ASTM Diffraction Files, Card N° 06 – 0524.
48.
KrajewskiA., D’alessioL., DeG.Maria, Physiso-Chemical and Thermophysical Properties of Cubic Binary Carbides, Crystal Research and Technology: Journal of Experimental and Industrial Crystallography33(3) (1998), 341–374.
49.
JunC.K., ShafferP.T.B.Elastic moduli of niobium carbide and tantalum carbide at high temperature, Journal of the Less Common Metals23(4) (1971), 367–373.
50.
ChenY.J., LiJ.B., WeiQ.M.et al., Preparation and growth mechanism of TaCx whiskers, Journal of Crystal Growth224(3-4) (2001), 244–250.
51.
WasserbächW.Low-temperature acoustic and thermal properties of plastically deformed, high-purity crystalline specimens of Al, Nb and Ta, Defect and Diffusion Forum 2, Trans Tech Publications Ltd (2002), 245–248.
