In this paper, the experimental solubility of hydrogen sulfide in aqueous N- Methyldiethanolamine + Amine Functionalized UiO-66 (UiO-66-NH2) was studied. UiO-66-NH2 was produced using solvothermal process, and its physicochemical properties were investigated by different techniques including XRD, TGA, TEM, BET, and FTIR to realize its crystalline structure, morphology, thermal stability, and porous structure. The Zeta potential of the solution was turned out to be about 26.6 mV (millivolt), meaning that UiO-66-NH2 particles are moderately stable in aqueous 40 wt.% MDEA. The solubility of hydrogen sulfide has been carried out using the isochoric saturation / or static method in two concentration grades of 0.1 and 0.5 wt.% of UiO-66-NH2 in the aqueous solution of 40 wt.% MDEA known as nanofluid. Experimental measurements were carried out at temperatures of 303.15 through 333.15 K, and pressures up 1100 kPa. Results showed that the addition of UiO-66-NH2 nanoparticles to the MDEA solution altered the results less than 3% , while the mean value of uncertainty reported in this work is about 4% , meaning that the addition of nanoparticles do not have remarkable effect on H2S solubility. In contrast, it causes an increased capacity of CO2 absorption of that solution up to 10%.
ZhangZ.Y. and LagallyM.G, Atomic processes in the early stages of thin-film growth, Science276 (1997), 377.
2.
Shokuhi RadA., AghaeiS.M., PazokiH., BinaeianE. and MirzaeiM., Surface interaction of H2O and H2S onto Ca12O12 nanocluster: Quantum-chemical analyses, Surface and Interface Analysis50 (2018), 411.
3.
SherafatiM., Shokuhi RadS., ArdjamndM., HeydarinasabA., PeyraviM. and MirzaeiM., Beryllium oxide (BeO) nanotube provides excellent surface towards adenine adsorption: A dispersion-corrected DFT study in gas and water phases, Current Applied Physics18 (2018), 1059.
4.
ZhouB., LiuZ., LiC., LiM., JiangL., ZhouY., ZhouF.L., ChenS., JerramsS. and YuJ., A highly Stretchable and sensitive strain sensor based on dopamine modified electrospun SEBS fibers and MWCNTs with carboxylation, Advanced Electronic Materials7 (2021), 2100233.
5.
ZhangX., TangY., ZhangF. and LeeC.S., A novel aluminium-graphit dual-ion battery, Advanced Energy Materials6 (2016), 1502588.
6.
WangM., JiangC., ZhangS., SongX., TangY. and ChangH.M., Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage, Nature Chemistry10 (2018), 667.
7.
TratnyekP.G. and JohnsonR.L., Nanotechnologies for environmental cleanup, Nano Today1 (2006), 44.
8.
KhanN.A., HasanZ. and JhungS.H., Adsorptive removal of hazardous materials using metal-organic frameworks (MOFs): a review, Journal of Hazardous Materials244–245 (2013), 444.
9.
HasanZ. and JhungS.H., Removal of hazardous organics from water using metal- organic frameworks (MOFs): plausible mechanisms for selective adsorptions, Journal of Hazardous Materials283 (2015), 329.
10.
LeeJ.E., LeeN., KimT., KimJ. and HyeonT., Multifunctional mesoporous silica nanocomposite nanoparticles for theranostic applications, Accounts of Chemical Research44 (2011), 893.
11.
AliA., ZafarH., ZiaM., Ul HaqI., PhullA.R., AliJ.S. and HussainA., Synthesis, characterization, applications, and challenges of iron oxide nanoparticles, Nanotechnology, Science and Applications9 (2016), 49.
12.
VahidiM., TavasoliA. and RashidiA.M., Preparation of amine functionalized UiO-66, mixing with aqueous N-Methyldiethanolamine and application on CO2 solubility, Journal of Natural Gas Science and Engineering28 (2016), 651.
13.
DaiC., WeiW. and LeiZ., Solubility of CO2 in the Mixture of Methanol and ZIF-8 at Low Temperatures, Journal of Chemical & Engineering Data60 (2015), 1311.
14.
GaneshM., HemalathaP., PengM.M. and JangH.T., One pot synthesized Li, Zr doped porous silica nanoparticle for low temperature CO2 adsorption, Arabian Journal of Chemistry10 (2013), 1501.
15.
RamacharyuluP.V.R.K., MuhammadR., Praveen KumarJ., PrasadG.K. and MohantyP., Iron phthalocyanine modified mesoporous titania nanoparticles for photocatalytic activity and CO2 capture applications, Physical Chemistry Chemical Physics17 (2015), 26456.
16.
CheraghiS., TaherM.A. and Karimi-MalehH., Highly sensitive square wave voltammetric sensor employing CdO/SWCNTs and room temperature ionic liquid for analysis of vanillin and folic acid in food samples, Journal of Food Composition and Analysis62 (2017), 254.
17.
ErenT., AtarN., YolaM.L. and Karimi-MalehH., A sensitive molecularly imprinted polymer based quartz crystal microbalance nanosensor for selective determination of lovastatin in red yeast rice, Food chemistry185 (2015), 430.
18.
ElyasiM., KhalilzadehM.A. and Karimi-MalehH., High sensitive voltammetric sensor based on Pt/CNTs nanocomposite modified ionic liquid carbon paste electrode for determination of Sudan I in food samples, Food chemistry141 (2013), 4311.
19.
ChaudhryQ. and CastleL., Food applications of nanotechnologies: an overview of opportunities and challenges for developing countries, Trends in Food Science & Technology22 (2011), 595.
20.
ShaalanM., SalehM., El-MahdyM. and El-MatbouliM., Recent progress in applications of nanoparticles in fish medicine: a review, Nanomed. Nanotechnol. Biol. Med12 (2016), 701.
21.
MartinezA.W., PhillipsS.T., ButteM.J. and WhitesidesG.M., Patterned paper as a platform for inexpensive, low volume, portable bioassays, Angewandte Chemie International Edition46 (2007), 1318.
22.
MartinezA.W., PhillipsS.T., CarrilhoE., Thomas IIIS.W., SindiH. and WhitesidesG.M., Simple telemedicine for developing regions: camera phones and paper-based microfluidic devices for real-time, off-site diagnosis, Analytical Chemistry80 (2008), 3699.
23.
BruzewiczD.A., RechesM. and WhitesidesG.M., Low-cost printing of poly (dimethylsiloxane) barriers to define microchannels in paper, Analytical Chemistry80 (2008), 3387.
24.
ZhangZ.Y. and LagallyM.G., Atomic processes in the early stages of thin-film growth, Science276 (1997), 377.
25.
GoharshadiK.E., Ahmadzadehh., SamieeS. and HadadianM., Nanofluids for heat transfer enhancement- A review, Physical Chemistry Research1 (2013), 1.
26.
ChenB., MaS., ZapataF., FronczekF.R., LobkovskyE.B. and ZhouH.C., Rationally designed micropores within a metal–organic framework for selective sorption of gas molecules, inorganic. chemistry46 (2007), 1233.
27.
MaB.Q., MulfortK.L. and HuppJ.T., Microporous pillared paddle-wheel frameworks based on mixed-ligand coordination of zinc ions, inorganic. chemistry44 (2005), 4912.
28.
NouarF., EubankJ.F., BousquetT., WojtasL., ZaworotkoM.J. and EddaoudiM., Supermolecular building blocks (SBBs) for the design and synthesis of highly porous metal-organic frameworks, Journal of the American Chemical Society130 (2008), 1833.
29.
MulfortK.L., FarhaO.K., SternC.L., SarjeantA.A. and HuppJ.T., Post-synthesis alkoxide formation within metal–organic framework materials: a strategy for incorporating highly coordinatively unsaturated metal ions, Journal of the American Chemical Society131 (2009), 3866.
30.
LongJ.R. and YaghiO.M., The pervasive chemistry of metal–organic frameworks, Chemical Society Reviews38 (2009), 1213.
31.
LiuY., JiangB., ZhaoL., ZhaoL., WangQ., WangC. and XuB., A dansyl-based fluorescent probe for sensing Cu2 + in aqueous solution,, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy261 (2021), 120009.
32.
LiY., MacdonaldD.D., YangJ., QiuJ. and WangS., Point defect model for the corrosion of steels in supercritical water: Part I, film growth kinetics, Corrosion Science163 (2020), 108280.
33.
ZhangL., XuY., LiuH., LiY., YouS., ZhaoJ. and ZhangJ., Effects of coexisting Na+, Mg2 + and Fe3+on nitrogen and phosphorus removal and sludge properties using A2O process, Journal of Water Process Engineering44 (2021), 102368.
34.
ZhangL., CongM., DingX., JinY., XuF., Wangy., ChenL. and ZhangL., A Janus Fe-SnO2 Catalyst that Enables Bifunctional Electrochemical Nitrogen Fixation, Angewandte Chemie26 (2020), 10980.
35.
KatzM.J., MoonS.Y., MondlochJ.E., BeyzaviM.H., StephensonC.J., HuppJ.T. and FarhaO.K, Exploiting parameter space in MOFs: a 20-fold enhancement of phosphate-ester hydrolysis with UiO-66-NH2, Chemical Science6 (2015), 2286.
36.
SchoeneckerP.M., CarsonC.G., JasujaH., FlemmingC.J.J. and WaltonK.S., Effect of Water Adsorption on Retention of Structure and Surface Area of Metal–Organic Frameworks, Industrial & Engineering Chemistry Research51 (2012), 6513.
37.
ChenQ., HeQ., LvM., XuY., YangH., LiuX. and WeiF., Selective adsorption of cationic dyes by UiO-66-NH2, Applied Surface Science327 (2015), 77.
38.
LuuC.L., NguyenT.T.V., NguyenT. and HoangT.C., Synthesis, characterization and adsorption ability of UiO-66-NH2, Advances in Natural Sciences: Nanosci. Nanotechnol6 (2015), 025004.
39.
KatzM.J., BrownZ.J., ColónY.J., SiuP.W., ScheidtK.A., SnurrR.Q., HuppJ.T. and FarhaO.K., A facile synthesis of UiO-66, UiO-67 and their derivatives, Chemical Communications49 (2013), 9449.
40.
JaliliA.H., Rahmati-RostamiM., GhotbiC., Hosseini-JenabM. and AhmadiA.N., Solubility of H2S in Ionic Liquids [bmim][PF6], [bmim][BF4], and [bmim][Tf2N], Journal of Chemical & Engineering Data54 (2009), 1844.
41.
ShokouhiM., FarahaniH., Hosseini-JenabM. and JaliliA.H., Solubility of Hydrogen Sulfide in N-Methylacetamide and N,N-Dimethylacetamide: Experimental Measurement and Modeling, Journal of Chemical & Engineering Data60 (2015), 499.
42.
ShokouhiM., FarahaniH. and Hosseini-JenabM., Experimental solubility of hydrogen sulfide and carbon dioxide in dimethylformamide and dimethylsulfoxide, Fluid Phase Equilibria367 (2014), 29.
43.
ShokouhiM., RezaieradA.R., ZekordiS.M., AbbasghorbaniM. and VahidiM., Solubility of Hydrogen Sulfide in Ethanediol, 1,2-Propanediol, 1-Propanol, and 2-Propanol: Experimental Measurement and Modeling, Journal of Chemical & Engineering Data61 (2016), 512.
44.
ShokouhiM., JaliliA.H. and ZoghiA.T., Experimental investigation of hydrogen sulfide solubility in aqueous sulfolane solution, The Journal of Chemical Thermodynamics106 (2017), 232.
45.
ShokouhiM., FarahaniH., VahidiM. and TaheriS.A., Experimental Solubility of Carbonyl Sulfide in Sulfolane and γ-butyrolactone, Journal of Chemical & Engineering Data62 (2017), 3401.
46.
ParkM.K. and SandallO.C., Solubility of Carbon Dioxide and NitrousOxide in 50mass% Methyldiethanolamine, Journal of Chemical & Engineering Data46 (2001), 166.
47.
Hosseini-JenabM., AbedinzadeganM., NajibiS.H. and VahidiM., and N.S.Matin, Solubility of Carbon Dioxide in Aqueous Mixtures ofN-Methyldiethanolamine+Piperazine+Sulfolane, Journal of Chemical & Engineering Data50 (2005), 583.
48.
LinstromP. and MallardW., NIST Chemistry Webbook, http://webbook.nist.gov/chemistry. NIST Standard Reference. Database accessed May (2010).
49.
Bernal-GarciaJ.M., Ramos-EstradaM., Iglesias-SilvaG.A. and HallK.R., Density and excess molar volumes of aqueous solutions of n-methyldiethanolamine (MDEA) at temperatures from (283.15 to 363.15) K, Korean Journal of Chemical Engineering48 (2003), 1442.
50.
ShoemakerD.P., SteinfeldC.W., NiblerJ.I. and McGraw-HillJ.W., Experiments in Physical Chemistry, McGraw-Hill; New York447 (1981)s.
51.
NikO.G., ChenX.Y. and KaliaguineS., Functionalized metal organic framework-polyimide mixed matrix membranes for CO2/CH4 separation, Journal of Membrane Science413–414 (2012), 48.
52.
LuuC.L., NguyenT.T.V. and NguyenT., Synthesis, characterization and adsorption ability of UiO-66-NH2, Advances in Natural Sciences Nanoscience and Nanotechnology6 (2015), 6.
53.
KandiahM., NilsenM.H., UsseglioS., JakobsenS., OlsbyeU., TilsetM., LarabiC. and QuadrelliE.A., Synthesis and Stability of Tagged UiO-66 Zr-MOFs, Chemistry of Materials22 (2010), 6632.
54.
SilvaC.G., LuzI., XamenaF.X.L., CormaA. and GarciaH., Water Stable Zr–Benzenedicarboxylate Metal–Organic Frameworks as Photocatalysts for Hydrogen Generation, Chemistry—A European Journall16 (2010), 11133.
55.
CavkaJ.H., JakobsenS., OlsbyeU., GuillouN., LambertiC., BordigaS. and LillerudK.P.A., A New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability, Journal of the American Chemical Society130 (2008), 13850.
56.
DeCosteJ.B., PetersonG.W., SchindlerB.J., KillopsK.L., BroweM.A. and MahleJ.J., The effect of water adsorption on the structure of the carboxylate containing metal–organic frameworks Cu-BTC, Mg-MOF-74, and UiO-66, Journal of Materials Chemistry A38 (2013), 11922.
57.
JeremiasF., LozanV., HenningerS.K. and JaniakC., Programming MOFs for water sorption: amino-functionalized MIL-125 and UiO-66 for heat transformation and heat storage applications, Dalton Trans45 (2013), 15967.
58.
LowJ.J., BeninA.I., JakubczakP., AbrahamianJ.F., FaheemS.A. and WillisR.R., Virtual High Throughput Screening Confirmed Experimentally: Porous Coordination Polymer Hydration, Journal of the American Chemical Society131 (2009), 15834.
59.
ZhangW., HuangH., LiuD., YangQ., XiaoY., MaQ. and ZhongC.A., new metal–organic framework with high stability based on zirconium for sensing small molecules, Microporous and Mesoporous Materials171 (2013), 118.
60.
BurtchN.C., JasujaH. and WaltonK.S., Water Stability and Adsorption in Metal–Organic Frameworks, Chemical Reviews114 (2014), 10575.
61.
AbidH.R., ShangJ., AngH.M. and WangS., Amino-functionalized Zr-MOF nanoparticles for adsorption of CO2 and CH4, International Journal of Smart and Nano Materials4 (2013), 72.
62.
BauerS., SerreC., DevicT., HorcajadaP., MarrotJ., FreyG. and StockN., High-Throughput Assisted Rationalization of the Formation of Metal Organic Frameworks in the Iron(III) Aminoterephthalate Solvothermal System, Inorganic Chemistry47 (2008), 7568.
