The composition and microstructure of different CaCO3-Ca2SiO4-carbon nanotube composites have been studied. Materials have been characterized by X-ray diffraction (XRD), high resolution scanning electron microscopy (SEM), thermogravimetric/differential thermal analysis (TG/DTA), and Fourier-transform infrared (FTIR) spectroscopy. The morphology and structure of the inorganic systems are affected by the presence of multiwall carbon nanotubes (MWCNT) during the hydration processes and the nature of the MWCNT/SDS interface plays a role in the curing stages of the composite enhancing the growth of calcium silicate.
JensenD.S., KanyalS.S., GuptaV., VailM.A., DadsonA.E., EngelhardM., VanfleetR., DavisR.C. and LinfordM.R., Stable microfabricated thin layer chromatography plates without volume distortion on patterned, carbon and Al2O3-primed carbon nanotube forests, J Chromatogr A1257 (2012), 195–203.
2.
ChenL., YoujiL., PengX., MingL. and MengxiongZ., Carbon nanotube embedded mesoporous titania pore-hole inorganic hybrid materials with high thermal stability, improved crystallinity and visible-light driven photocatalytic performance, Micropor Mesopor Mat195 (2014), 319–329.
3.
JafryH.R., TailorR.C., IbbottG. and BarronA.R., Coating carbon nanotubes with lead sulfide and bismuth siulfide, Main Group Chem12 (2013), 67–86.
4.
JitianuA., CacciaguerraT., BenoitR., DelpeuxS., BeguinF. and BonnamyS., Synthesis and characterization of carbon nanotubes–TiO2 nanocomposites, Carbon42 (2004), 1147–1151.
5.
SalvetatJ.P., BriggsG.A., BonardJ.M., BacsaR.R., KulikA.J., StöckliT., BurnhamN.A. and ForróL., Elastic and shear moduli of single-walled carbon nanotube ropes, Phys Rev Lett82 (1999), 944–947.
6.
LupoF., KamalakaranR., ScheuC., GrobertN. and RühleM., Microstructural investigations on zirconium oxide–carbon nanotube composites synthesized by hydrothermal crystallization, Carbon42 (2004), 1995–1999.
7.
NochaiyaT. and ChaipanichA., Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials, Appl Surf Sci257 (2011), 1941–1945.
8.
LiG.Y., ZengL.B., WangL., YanB. and FanJ., A method to improve the microstructure and mechanical properties of carbon nanotube/cement matrix, Gongneng Cailiao45 (2014), 18107–18111.
9.
WangB., ZhangY. and MaH., Porosity and pore size distribution measurement of cement/carbon nanofiber composites by 1H low field nuclear magnetic resonance, J Wuhan Univ Technol Mater Sci Ed29 (2014), 82–88.
10.
RiegerJ., KellermeierM. and NicoleauL., Formation of nanoparticles and nanostructures—an industrial perspective on CaCO3, cement, and polymers, Angew Chem Int Ed53 (2014), 12380–12396.
11.
PeigneyA., LaurentCh., FlahautE. and RoussetA., Carbon nanotubes in novel ceramic matrix composites, Ceram Int26 (2000), 677–683.
12.
KuzumakiT., UjiieO., IchinoseH. and ItoK., Mechanical characteristics and preparation of carbon nanotube fiber-reinforced Ti composite, Adv Eng Mater2 (2000), 416–418.
13.
GrovenL.J. and PuszynskiJ.A., Effect of carbon nanotube addition on morphology of SHS synthesized materials, Int J Self-Propag High-Temp Synth16 (2007), 189–198.
14.
DobrzańskiL.A., MacekM. and TomiczekB., Effect of carbon nanotubes content on morphology and properties of AlMg1SiCu matrix composite powders, AMSE69 (2014), 12–18.
15.
MeiH., WangH., ZhangN., DingH., WangY. and BaiQ., Carbon nanotubes introduced in different phases of C/PyC/SiC composites: Effect on microstructure and properties of the materials, Compos Sci Technol115 (2015), 28–33.
16.
AndersonR.E. and BarronA.R., Effect of carbon nanomaterials on calcium carbonate crystallization, Main Group Chem4 (2005), 279–289.
17.
TasisD., PispasS., GaliotisC. and BouropoulosN., Growth of calcium carbonate on non-covalently modified carbon nanotubes, Mater Lett61 (2007), 5044–5046.
18.
MakarJ. and ChanG.W., Growth of cement hydration products on single-walled carbon nanotubes, J Am Ceram Soc92 (2009), 1303–1310.
19.
InamF., HeatonA., BrownP., PeijsT. and ReeceM.J., Effects of dispersion surfactants on the properties of ceramic–carbon nanotube (CNT) nanocomposites, Ceram Int40 (2014), 511–516.
20.
DoostdarN., SmithC., HamillM.B. and BarronA.R., Synthesis of calcium-silica composites: A route towards an in-vitro model system for calcific band keratopathy precipitates, J Biomed Mater Res99A (2011), 173–183.
21.
AllenA.J., ThomasJ.J. and JenningsH.M., Composition and density of nanoscale calcium–silicate–hydrate in cement, Nat Mater6 (2007), 311–316.
22.
WhitsittE.A. and BarronA.R., Silica coated single walled nanotubes, Nano Lett3 (2003), 775–778.
23.
JafryH.R., WhitsittE.A. and BarronA.R., Silica coating of vapor grown carbon fibers, J Mater Sci42 (2007), 7381–7388.
24.
WhitsittE.A. and BarronA.R., Effect of surfactant on particle morphology for liquid phase deposition of submicron silica, J Colloid Interface Sci287 (2005), 318–325.
25.
OrbaekA.W., AggarwalN. and BarronA.R., The development of a ‘process map’ for the growth of carbon nanomaterials from ferrocene by injection CVD, J Mater Chem A1 (2013), 14122–14132.
26.
GomezV., IrustaS., AdamsW.W., HaugeR.H., DunnillC.W. and BarronA.R., Enhanced carbon nanotubes purification by physic-chemical treatment with microwave and Cl2, RSC Adv6 (2016), 11895–11902.
27.
MusićS., Filipović-VincekovićN. and SekovanićL., Precipitation of amorphous SiO2 particles and their properties, Braz J Chem Eng28 (2011), 89–94.
28.
RadhaA., ForbesT.Z., KillianC.E., GilbertP. and NavrotskyA., Transformation and crystallization energetics of synthetic and biogenic amorphous calcium carbonate, Proc Natl Acad Sci107 (2010), 16438–16443.
29.
NilsenO., FjellvågH. and KjekshusA., Growth of calcium carbonate by the atomic layer chemical vapour deposition technique, Thin Solid Films450 (2004), 240–247.
30.
XuB. and PoduskaK.M., Linking crystal structure with temperature-sensitive vibrational modes in calcium carbonate minerals, Phys Chem Chem Phys16 (2014), 17634–17639.
31.
LaudisioG. and BrandaF., Sol–gel synthesis and crystallisation of 3CaO·2SiO2 glassy powders, Thermochim Acta370 (2001), 119–124.
32.
SinghM.K., AgarwalA., GopalR., SwarnkarR.K. and KotnalaR.K., Dumbbell shaped nickel nanocrystals synthesized by a laser induced fragmentation method, J Mater Chem21 (2011), 11074–11079.
33.
PappasG.S., LiatsiP., KartsonakisI.A., DanilidisI. and KordasG., Synthesis and characterization of new SiO2-CaO hollow nanospheres by sol–gel method: Bioactivity of the new system, J Non-Cryst Solids354 (2008), 755–760.
34.
MahajanA., KingonA., KukoveczA. and VilarinhoP.M., Studies on the thermal decomposition of multiwall carbon nanotubes under different atmospheres, Mater Lett90 (2013), 165–168.
35.
GomezV., DunnillC.W. and BarronA.R., A microwave cured flux for the adhesion of ceramic particles using silica coated carbon nanotubes, Carbon93 (2015), 774–781.
36.
MurakamiF.S., RodriguesP.O., Teixeira de CamposC.M. and SilvaM.A.S., Physicochemical study of CaCO3 from egg shells, Ciênc Tecnol Aliment27 (2007), 658–662.
37.
RamachandranV.S., ParoliR.M.,
BeaudoinJ.J. and DelgadoA.H., Handbook of thermal analysis of construction materials. William Andrew Publishing: New York, 2002.
38.
BregeJ.J., GallawayC. and BarronA.R., Fluorescence quenching of single walled carbon nanotubes in SDBS surfactant suspension by metal ions: Quenching efficiency as a function of metal and nanotube identity, J Phys Chem C111 (2007), 17812–17820.
39.
GongX., LiuJ., BaskaranS., VoiseR.D. and YoungJ.S., Surfactant-assisted processing of carbon nanotube/polymer composites, Chem Mater12 (2000), 1049–1052.
40.
EitanA., JiangK., DukesD., AndrewsR. and SchadlerL.S., Surface modification of multiwalled carbon nanotubes: Toward the tailoring of the interface in polymer composites, Chem Mater15 (2003), 3198–3201.
