Abstract
The neutron wavelength resolution, Bragg-edge measurement ability and future prospects regarding the neutron count rate were investigated at AISTANS. The wavelength resolution evaluated by Bragg-edge analysis using an iron powder sample is in reasonably good agreement with calculations at neutron wavelengths of 0.2–0.3 nm. Bragg-edge imaging was also performed on a steel plate sample with distinct regions of BCC and FCC crystallinity, and the different crystal structures were successfully discriminated. In addition, an aluminum sample containing a friction stir spot welding region was also measured and the 200 and 111 Bragg-edges at the two joining areas were observed. However, it was hard to characterize the difference in texture between the two areas. The neutron counting rate for Bragg-edge imaging is expected to increase by approximately a factor 50 in the near future thanks to the planned improvements of the electron beam power and the detection efficiency of the neutron detector.
Get full access to this article
View all access options for this article.
