A research on the sintering and manufacturing condition of small cavity in mobile communication cavity filter

Abstract

As the mobile communication evolves toward next generation, the 5th G, it was required that the number of base stations should be increased and the size of the base station should be reduced. In order for the base station to be designed in small size, we need to minimize the filters in the base station. There are couple of ways to reduce the size of the filters in the base station, one of which is to change the materials for the resonators of filter from the metal to ceramic. The ceramic resonator makes it possible to reduce the size of the filter at the same time it would be difficult to get the performance as the metal resonator. In order to use ceramic resonator with the same characteristics as the metal resonator, we have to consider the sintering and the fabrication condition of ceramic resonator. This paper introduces the sintering and fabrication condition of ceramic resonator for the filter miniaturization.

Keywords

RF filter ceramic resonator miniaturization sintered

Get full access to this article

View all access options for this article.

References

Telecom

S.K.

, 5G White Paper, 2014.

Nakamura

, Nagata

and Benjebbour

, Trends in small Cell enhancements in LTE advanced, IEEE communi Mag, 2013, pp. 98–105.

Hwang

, Design of the small BPF for wireless communication systems, KIIEE Journal19(7) (2005).

et al., A study on RF cavity filter miniaturization cerarmic resonator, JARDCS10(1) (2017).

Kim

et al., Microwave dielectric fo;ter technology trend, Electronics and Telecommunications TrendsB10(3) (1999).

Choi

et al., Structural and microwave dielectric properties of the 0.9<gTi)3-0.1SrTiO3 cera,ocs with sintering temperature, KIEE Journal49(5) (2005).

K.T.

et al., Microwave dilectric properties of (1-x)La2/3TiO3-xLaA1O3), KCER Journal34(4) (1997).