In the direction of better resolution of time lag, nonlinearity and uncertainty in the heating system, a BPNN-PID (BP neural network PID) controller is proposed in this paper. A complete heating auto-control system is designed with the experimental platform of a university heat exchange station in Zhangjiakou as the research background. The auto-control system takes Programmable Logic Controller (PLC) as the control core, uses BPNN algorithm to optimize the PID control parameters, and finally takes outlet temperature of 1# plate exchanger as the main control parameter to conduct experimental research on BPNN-PID control and single-loop feedback control respectively. The results show that compared with the single-loop feedback controller, the PID control based on BPNN algorithm has superior control quality, with shorter adjustment time, smaller overshoot, finer control accuracy and stability.
BaidyaDBritoDRAMP.SasmitoA, et al. Diesel generator exhaust heat recovery fully-coupled with intake air heating for off-grid mining operations: An experimental, numerical, and analytical evaluation. International Journal of Mining Science and Technology.2022; 32(01): 155-169.
2.
XiaoMZhangWWenK, et al. Fault Diagnosis Based on BP Neural Network Optimized by Beetle Algorithm. Chinese Journal of Mechanical Engineering.2021; 34(06): 270-279.
3.
WeiLLLiHWuD, et al. Clock synchronization error compensation algorithm based on BP neural network model. Acta Physica Sinica.2021; 70(11): 143-153.
4.
LiWDongYXihongZ, et al. Thermal-Hydraulic Calculation and Analysis on Evaporator System of a 1000 MW Ultra-Supercritical Pulverized Combustion Boiler with Double Reheat. Journal of Thermal Science.2021; 30(03): 807-816.
5.
FKN.,NKD.,PPN.,Dynamic disturbance rejection controllers for neutral time delay systems with application to a central heating system,Science in China (Series F: Information Sciences).,2009;52(07):1084–1094.
6.
SylwiaPIzabelaWDariuszK, et al. Application of a lumped multi-section model for analyzing the thermal performance of a small-scale biomass boiler. Journal of Thermal Science.2021; 30(03): 1034-1045.
7.
HaiboWZhaohuiLHaiyanL. The study on the heat transfer characteristics of oxygen fuel combustion boiler. Journal of Thermal Science.2016; 25(05): 470-475.
8.
UllahNMehmoodYAslamJ, et al. Fractional order adaptive robust formation control of multiple quad-rotor UAVs with parametric uncertainties and wind disturbances. Chinese Journal of Aeronautics.2022; 35(08): 204-220.
9.
ZhangXHanQGeX, et al. Networked control systems: A survey of trends and techniques. IEEE/CAA Journal of Automatica Sinica.2020; 7(01): 1-17.
10.
YuWWangHHongH, et al. Distributed cooperative anti-disturbance control of multi-agent systems: An overview. Science China (Information Sciences).2017; 60(11): 77-90.
11.
LiuZHZhouXZhuRJ, et al. Development of a data acquisition and control system for the International Thermonuclear Experimental Reactor neutron flux monitor. Plasma Science and Technology.2020; 22(01): 100-107.
12.
PiotrDM. Control valve with a constant inner authority value. Journal of Thermal Science.2018; 27(05): 487-495.
13.
ZhengXJMuZY. Value analysis of district heating system with gas-fired peak load boiler in secondary network. Journal of Central South University of Technology.2009; 16(S1): 178-182.
14.
AliASNaserAK. Improvement of Performance of Flat Plate Solar Collector Using Water/Zinc Oxide NanoFluids. Journal of Central South University.2021; 28(11): 3391-3403.
15.
JinZQiuCJiangC, et al. Influence of spool shape on cavitation flow in sleeve type control valve. Journal of Zhejiang University-Science A (Applied Physics & Engineering).2020; 21(01): 1-14.
16.
LeiSGuoXTangH. Experiment and analysis of the formation, expansion and dissipation of gasbag in fine sediments based on pore water pressure survey. Acta Oceanologica Sinica.2022; 41(04): 91-100.
17.
WeiXZhangLYangH, et al. Machine learning for pore-water pressure time-series prediction: Application of recurrent neural networks. Geoscience Frontiers.2021; 12(01): 453-467.
18.
TongXJingYXinleiW, et al. Influence of fill point in multiple-heat-sources looped district heating system with distributed variable-speed pumps. Journal of Thermal Science.2020; 29(05): 1206-1222.
19.
UsmanUMFaruqueOM. Applications of synchrophasor technologies in power systems. Journal of Modern Power Systems and Clean Energy.2019; 7(02): 211-226.
20.
ZhangXZhangYLinJ, et al. Research on the principle of space high-precision temperature control system of liquid crystals based Stokes polarimeter. Research in Astronomy and Astrophysics.2021; 21(01): 99-106.
21.
PengPFLinYPHuB, et al. Adaptive Ant Colony Algorithm Optimal PID Control based on genetic factors. Acta Electronica Sinica.2006; (06): 1109-1113.
22.
LiaoHCGaoYWangQG, et al. Viscosity Prediction Model of Aluminum Alloy Based on BP Neural Network Algorithm. Transactions of Nonferrous Metals Society of China.2021; 31(10): 2978-2985.
23.
LiXZhangZAnJ, et al. Adaptive sliding mode control of modular self-reconfigurable spacecraft with time-delay estimation. Defence Technology.2022; 18(12): 2170-2180.
24.
YiJLiuZWZengWQ. Design of isothermal Extrusion Velocity Curve of Split Die of Hollow Aluminum Profiles Based on PID Algorithm and Finite Element Simulation. Transactions of Nonferrous Metals Society of China.2021; 31(07): 1939-1950.
25.
JinLZhengXLuoX. Neural Dynamics for Distributed Collaborative Control of Manipulators With Time Delays. IEEE/CAA Journal of Automatica Sinica.2022; 9(05): 854-863.
