Fabrication technique using a core and cavity mold of a hybrid composite ballistic helmet

Abstract

Material used for helmet technology has transformed moderately little since the introduction of aramids, which ballistic helmets still uses woven aramids with a thermoset resin system. Most widely used strengthening material for ballistic helmet is Kevlar fibers which comprise outstanding impact resistance and high strength to weight ratio. For Kevlar reinforcement and resin shaping process, composite materials uses molding process in the fabrication methods. The most vital fabrication method is the hand lay-up process. Hand lay-up process normally consists of laying a dry fabric layer by hand onto a mold to shape into desirable design and shape. After the lay-up process is done, resin is then applied to the dry plies. There are several accessible curing methods and the most commonly used method is to let the product to cure at room temperature. This paper presents the fabrication process of ballistic helmet using a hand lay-up fabrication process with a core and cavity mold. This paper also describes the helmet mold design, materials and processing methods.