In this paper, the magnetic field and temperature field of transformer are analyzed, and the influence of temperature on electrical steel sheet is considered. Experiment are supplied to obtain the magnetic properties curves (B-H curves, B-P curves, and magnetic permeability curves of 30QG120), which are required for the accurate FEM (finite element method) simulation setup. Finally, the magnetizing characteristics and temperature distribution of the transformer under different temperatures and loads are studied experimentally. The simulation results of a singlephase transformer are verified by the experimental results.
JosueF., Transformer hot-spot temperature estimation for short-time dynamic loading, IEEE International Conference on Condition Monitoring and Diagnosis (2012), 217–220.
2.
ChenD.FangL.KwonB., Measurement research on magnetic properties of electrical sheet steel under different temperature, harmonic and DC bias, AIP Advances7(5) (2017), 056682.
3.
OdaY.KohnoM. and HondaA., Recent development of non-oriented electrical steel sheet for automobile electrical devices, Journal of Magnetism & Magnetic Materials320(20) (2008), 2430–2435.
4.
FreitagCJoostC. and LeibfriedT., Modified Epstein frame for measuring electrical steel under transformer like conditions, International Conference on High Voltage Engineering & Application (2014), 1–4.
5.
ToneK., Magnetic characteristic analysis considering the crystal grain of grain-oriented electrical steel sheet, IEEE Transactions on Magnetics41(5) (2005), 1704–1707.
6.
BöllingF.GüntherK. and HuneusH., Magnetic properties of low loss non-oriented electrical steel sheet of thin gauge and at high frequencies, Physica Scripta39(6) (1989), 764–766.
7.
MiyagiD., Measurement of magnetic properties of non-oriented electrical steel sheet at liquid nitrogen temperature using single sheet tester, IEEE Transactions on Magnetics46(2) (2010), 314–317.
8.
ChenS.WoodA.R. and ArrillagaJ., HVDC converter transformer core saturation instability: A frequency domain analysis, IEE Proceedings-Generation, Transmission and Distribution143(1) (1996), 75–81.
9.
LiuJ. and LuY., Transient simulation analysis of electromagnetic field and temperature field of high-frequency transformer, High Voltage Engineering45(4) (2019), 1191–1200.
10.
LiuX, Analysis of Leakage Magnetic Field and Temperature Field of 800KVA Deep-sea Transformer, Huazhong University of Science and Technology, Wuhan China, 2018.
11.
YaoA. and IronY., Loss characteristics under pwm inverter excitation at high ambient temperature, in: International Symposium on Linear Drives for Industry Applications (LDIA), IEEE, Osaka, Japan, 2017, pp. 1–3.
12.
BoleslawA.PiotrowskiL.JasnochP. and ChmielewskiM., Impact of tensile and compressive stress on classical and acoustic Barkhausen effects in grain-oriented electrical steel, IEEE Transactions on Magnetics50(4) (2014), 1–4.
13.
PatrickB.VeigelM. and LiuY., Iron loss measurement of nonoriented silicon and cobalt iron electrical steel sheets at liquid nitrogen temperature using ring specimen, in: International Electric Machines and Drives Conference, IEEE, Miami, FL, 2017, pp. 1–7.
14.
RuilinP. and ZengL., Studies of core loss of thin non-oriented electrical steel for electrical vehicle traction motors, in: International Conference on Electrical Machines and Systems, Jeju, 2018, pp. 2715–2718.
15.
TakajoS. and ItoT., Loss and noise analysis of transformer comprising grooved grain-oriented silicon steel, IEEE Transactions on Magnetics53(9) (2017), 1–6.
