Permanent magnet synchronous hub motors (PMSHMs) have been gradually introduced into the applications of electric vehicles. In order to output more torque, many researchers turned their research direction to six-phase motors. Because it is composed of two sets of three-phase windings, there will be interference between the windings, affecting the performance of the motor. In order to improve the steady and dynamic-state performance of permanent magnet six phase synchronous motor, a predictive torque control method based on multi vector model is proposed in this paper. Finally, experimental results show the effectiveness of this method.
SunX.JinZ.WangS.YangZ.LiK.FanY. and ChenL., Performance improvement of torque and suspension force for a novel five-phase BFSPM machine for flywheel energy storage systems, IEEE Trans. Appl. Supercond.29(2) (2019), 0601505.
2.
SuJ.GaoR. and HusainI., Model predictive control based field-weakening strategy for traction EV used induction motor, IEEE Trans. Ind. Electron.54(3) (2018), 2295–2305.
3.
SunX.HuC.LeiG.YangZ.GuoY. and ZhuJ., Speed sensorless control of SPMSM drives for EVs with a binary search algorithm-based phase-locked loop, IEEE Trans. Veh. Technol. (2020), doi:10.1109/TVT.2020.2981422.
4.
SunX.ChenL.YangZ. and ZhuH., Speed-sensorless vector control of a bearingless induction motor with artificial neural network inverse speed observer, IEEE/ASME Trans. Mechatron18(4) (2013), 1357–1366.
5.
DingH.ZhuH. and HuaY., Optimization design of bearingless synchronous reluctance motor, IEEE Trans. Appl. Supercond.28(3) (2018), 5202905.
6.
YeX.YangZ. and ZhangT., Modelling and performance analysis on abearingless fixed-pole rotor induction motor, IET Trans. Ind. Appl.13(2) (2019), 259–266.
7.
ShiZ.SunX.CaiY.YangZ.LeiG.GuoY., Torque analysis and dynamic performance improvement of A PMSM for EVs by skew angle optimization, IEEE Trans. Appl. Supercond.29(2) (2019), 0600305.
8.
XuW.ChenH.WangJ. and ZhaoH., Velocity optimization for braking energy management of in-wheel motor electric vehicles, IEEE Access7 (2019), 66410–66422.
9.
SunX.SuB.WangS.YangZ.LeiG.ZhuJ., Performance analysis of suspension force and torque in an IBPMSM with V-shape PMs for flywheel batteries, IEEE Trans. Magn.54(11) (2018), 8105504.
10.
ChenX.CaiY.RenY., Spacecraft angular rates and angular acceleration estimation using single-gimbal magnetically suspended control moment gyros, IEEE Trans. Ind. Electron66(1) (2019), 440–450.
11.
SunY.SuB. and SunX., Optimal design and performance analysis for interior composite-rotor bearingless permanent magnet synchronous motors, IEEE Access (2019), 7456–7465.
12.
YangZ.JiJ.SunX.ZhuH. and ZhaoQ., Active disturbance rejection control for bearingless induction motor based on hyperbolic tangent tracking differentiator, IEEE J. Em. Sel. Top P (2019), 2923793, doi:10.1109/JESTPE.
13.
RenY. and FangJ., Current sensing resistor design to include current derivative in PWM H-bridge unipolar switching power amplifiers for magnetic bearings, IEEE Trans. Ind. Electron59(12) (2012), 4590–4600.
14.
YangZ.ChenX.SunX.BaoC. and LuJ., Rotor radial disturbance control for a bearingless induction motor based on improved active disturbance rejection control, COMPEL38(1) (2019), 138–152.
15.
GuH.ZhuH. and HuaY., Soft sensing modeling of magnetic suspension rotor displacements based on continuous hidden markov model, IEEE Trans. Appl. Supercond.28(3) (2018), 3600105.
16.
LiK.ChengG.SunX.ZhaoD. and YangZ., Direct torque and suspension force control for bearingless induction motors based on active disturbance rejection control scheme, IEEE Access (2019), 86989–87001.
17.
ZhuH. and HuangJ., Compensation control of suspension force for LS-BLPMSM, IET Trans. Ind. Appl.11(4) (2017), 622–630.
18.
SunX.ShiZ.CaiY.LeiG.GuoY. and ZhuJ., Driving-cycle oriented design optimization of a permanent magnet hub motor drive system for a four-wheel-drive electric vehicle, IEEE Trans. Trans. Electrification (2020), doi:10.1109/TTE.2020.3009396.
19.
RenY.SuD. and FangJ., Whirling modes stability criterion for a magnetically suspended flywheel rotor with significant gyroscopic effects and bending modes, IEEE Trans. Power Electron28(12) (2013), 5890–5901.
20.
SunX.ShiZ.LeiG.GuoY. and ZhuJ., Analysis and design optimization of a permanent magnet synchronous motor for a campus patrol electric vehicle, IEEE Trans. Veh. Technol.68(11) (2019), 10535–10544.
21.
ZhaoC. and ZhuH., Design and analysis of a novel bearingless flux-switching permanent magnet motor, IEEE Trans. Ind. Electron64(8) (2017), 6127–6136.
22.
HanJ.KumD. and ParkY., Synthesis of predictive equivalent consumption minimization strategy for hybrid electric vehicles based on closed-form solution of optimal equivalence factor, IEEE Trans. Veh. Technol.66(7) (2017), 5604–5616.
23.
ShiZ.SunX.CaiY.TianX. and ChenL., Design optimization of an outer-rotor permanent magnet synchronous hub motor for a low-speed campus patrol EV, IET Electric Power APP (2020), doi:10.1049/iet-epa.2020.0130.
24.
HaoZ.ZhuH.ChengY. and HuangL., Speed control of bearingless permanent magnet synchronous motor based on flux strengthening and voltage regulation, IEEE Access (2018), 72392–72401.
25.
LiK.LingF.SunX.ZhaoD. and YangZ., Reactive-power-based MRAC for rotor resistance and speed estimation in bearingless induction motor drives, Int. J. Appl. Electrom.62(1) (2020), 127–143.
26.
FangJ. and RenY., High precision control for a single gimbal magnetically suspended control moment gyro based on inverse system method, IEEE Trans. Ind. Electron58(9) (2011), 4331–4342.
27.
SunX.SuB.ChenL.YangZ.ChenJ. and ZhangW., Nonlinear flux linkage modeling of a bearingless permanent magnet synchronous motor based on AW-LSSVM regression algorithm, Int. J. Appl. Electrom.51(2) (2016), 151–159.
28.
JinZ.SunX.YangZ.WangS.ChenL. and LiK., A novel four degree-of-freedoms bearingless permanent magnet machine using modified cross feedback control scheme for flywheel energy storage systems, INJ of Electronics60(3) (2019), 379–392.
29.
LiH. and ZhuH., Design of bearingless flux-switching permanent-magnet motor, IEEE Trans. Appl. Supercond.26(4) (2016), 5202005.
30.
SunX.DiaoK.LeiG.GuoY. and ZhuJ., Study on segmented-rotor switched reluctance motors with different rotor pole numbers for BSG system of hybrid electric vehicles, IEEE Trans. Veh. Technol.68(6) (2019), 5537–5547.
31.
RenY.ChenX. and CaiY., Attitude-rate measurement and control integration using magnetically suspended control and sensitive gyroscopes, IEEE Trans. Ind. Electron.65(6) (2018), 4921–4932.
32.
DiaoX.ZhuH.QinY. and HuaZ., Torque ripple minimization for bearingless synchronous reluctance motor, IEEE Trans. Appl. Supercond.28(3) (2012), 5205505.
33.
LiK.ChengG.SunX. and YangZ., A nonlinear flux linkage model for bearingless induction motor based on GWO-LSSVM, IEEE Access (2019), 36558–36567.
34.
ZhuH. and LiF., Optimization design of bearingless permanent-magnet slice motor, IEEE Trans. Appl. Supercond.26(4) (2016), 5202804.
35.
PanW.ZhuH. and LiH., Design and optimization of bearingless permanent magnetic synchronous motors, IEEE Trans. Appl. Supercond.26(4) (2016), 5200704.
36.
DiaoK.SunX. and LeiG., Gerd Bramerdorfer, Youguang Guo, and Jianguo Zhu. System-level robust design optimization of a switched reluctance motor drive system considering multiple driving cycles, IEEE Trans. Energy Convers. (2020), doi:10.1109/TEC.2020.3009408.
37.
GuanJ.C.ChenB.C.HuangY.D. and ChiuY.J., Adaptive power management strategy for hybrid electric vehicle with belt-driven starter generator, in: Proc. IEEE Int. Conf. on Networking, Sensing and Control (ICNSC 2015), 2015, pp. 503–508.
38.
LiK.LingF.SunX.CaiY.ZhaoD. and YangZ., Displacement sensorless control for bearingless induction motor drives based on the MRAS method, Int. J. Appl. Electrom.62(4) (2020), 787–805.
39.
SunX.WuJ.LeiG.CaiY.ChenX. and GuoY., Torque modeling of a segmented-rotor SRM using maximum-correntropy-criterion-based LSSVR for torque calculation of EVs, IEEE J. Emerg. Sel. Topics Power Electron. (2020), doi:10.1109/JESTPE.2020.2977957.
40.
JinZ.SunX.CaiY.ZhuJ.LeiG. and GuoY., Comprehensive sensitivity and cross-factor variance analysis-based multi-objective design optimization of a 3-DOF hybrid magnetic bearing, IEEE Trans. Magn. (2020), doi:10.1109/TMAG.2020.3005446.
41.
LiD.QuR.LiJ.WuL. and XuW., Analysis of torque capability and quality in vernier permanent magnet machines, IEEE Trans. Ind. Appl.52(1) (2016), 125–135.
42.
LiS.ZhangS.HabetlerT.G. and HarleyR.G., Modeling, design optimization, and applications of switched reluctance machines—a review, IEEE Trans. Ind. Appl.55(3) (2019), 2660–2681.
43.
ShiZ.SunX.CaiY. and YangZ., Robust design optimization of a five-phase PM hub motor for fault-tolerant operation based on Taguchi method, IEEE Trans. Energy Convers (2020).
44.
WuB.XuD.JiJ.ZhaoW. and JiangQ., Field-oriented control and direct torque control for a five-phase fault-tolerant flux-switching permanent-magnet motor, Chinese Journal of Electrical Engineering4(4) (2018), 48–56.
45.
YangZ.WanL.SunX.LiF. and ChenL., Sliding mode variable structure control of a bearingless induction motor based on a novel reaching law, Energies9(6) (2016), 1–14.
46.
DiaoK.SunX.LeiG.GuoY. and ZhuJ., Multiobjective system level optimization method for switched reluctance motor drive systems using finite element model, IEEE Trans. Ind. Electron.67(12) (2020), 10055–10065.
47.
YangZ.ZhangD.SunX. and YeX., Adaptive exponential sliding mode control for a bearingless induction motor based on a disturbance observer, IEEE Access (2018), 35425–35434.
48.
SunX.ChenL.JiangH.YangZ.ChenJ. and ZhangW., High-performance control for a bearingless permanent magnet synchronous motor using neural network inverse scheme plus internal model controllers, IEEE Trans. Ind. Electron.63(6) (2016), 3479–3488.
49.
SunQ.ZhangW. and WangQ., Design and analysis of a novel bipolar transverse-flux motor with stator permanent-magnet excitation, Chinese Journal of Electrical Engineering4(1) (2018), 60–66.
50.
YangZ.DingQ.SunXJiJ. and ZhaoQ., Design and analysis of a novel wound rotor for a bearingless induction motor, Inj Electronics106(12) (2016), 1829–1844.
51.
ZhouM.ZhangX.ZhaoW.JiJ. and HuJ., Influence of magnet shape on the cogging torque of a surface-mounted permanent magnet motor, Chinese Journal of Electrical Engineering5(4) (2019), 40–50.
52.
SunX.XueZ.ChenL.YangZ. and ZhuH., Radial position control of a magnetically suspended rotor system in a direct-driven spindle using inverse system scheme, Timeas Control38(9) (2016), 1073–1086.
53.
SunX.DiaoK. and YangZ., Performance improvement of a switched reluctance machine with segmental rotors for hybrid electric vehicles, Computers and Electrical Engineering (2019), 244–259.
54.
SunX.ChenL.YangZ. and ZhuH., Speed-sensorless vector control of a bearingless induction motor with artificial neural network inverse speed observer, IEEE/ASME Trans. Mechatron18(4) (2013), 1357–1366.
55.
LuJ.HuY.ZhangX.WangZ.LiuJ. and GanC., High-frequency voltage injection sensorless control technique for IPMSMs fed by a three-phase four-switch inverter with a single current sensor, IEEE/ASME Trans. Mech.23(2) (2018), 758–768.
56.
ShiZ.SunX.CaiY. and YangZ., Robust design optimization of a five-phase PM hub motor for fault-tolerant operation based on taguchi method, IEEE Trans. Energy Convers (2020), doi:10.1109/TEC.2020.2989438.
57.
JiangS.LiuG.ZhaoW.XuL. and ChenQ., Modeling and analysis of spoke-type permanent magnet vernier machine based on equivalent magnetic network method, Chinese Journal of Electrical Engineering4(2) (2016), 96–103.
58.
SunX.HuC.LeiG.GuoY. and ZhuJ., State feedback control for a PM hub motor based on grey wolf optimization algorithm, IEEE Trans. Power Electron.35(1) (2020), 1136–1146.
59.
LuJ.YangZ.SunX.BaoC. and ChenX., Direct levitation force control for a bearingless induction motor based on model prediction, IEEE Access7(1) (2016), 65368–65378.
60.
JiangD.NingP.LaiR. and FangZ., Fred Wang. Modular design method for motor drives, Chinese Journal of Electrical Engineering4(1) (2018), 1–10.
61.
SunX.JinZ.CaiY.YangZ. and ChenL., Grey wolf optimization algorithm based state feedback control for a bearingless permanent magnet synchronous machine, IEEE Trans. Power Electron35(12) (2020), 13631–13640.
62.
LiuJ.GongC.HanZ. and YuH., IPMSM model predictive control in flux-weakening operation using an improved algorithm, IEEE Trans. Ind. Electron.65(12) (2018), 9378–9387.
63.
SunX.WuM.LeiG.GuoY. and ZhuJ., An improved model predictive current control for PMSM drives based on current track circle, IEEE Trans. Ind. Electron (2020), doi:10.1109/TIE.2020.2984433.
64.
CortesP.Guidelines for weighting factors design in model predictive control of power converters and drives, in: 2009 IEEE International Conference on Industrial Technology, 2009, pp. 1–7.
65.
SunX.HuC.ZhuJ.WangS.ZhouW.YangZ., MPTC for PMSMs of EVs with multi-motor driven system considering optimal energy allocation, IEEE Trans. Magn.55(7) (2019), 8104306.
66.
SunX.ChenL.JiangH.YangZ.ChenJ. and ZhangW., High-performance control for a bearingless permanent magnet synchronous motor using neural network inverse scheme plus internal model controllers, IEEE Trans. Ind. Electron63(6) (2016), 3479–3488.
67.
RojasC.A.RodriguezJ.VillarroelF.EspinozaJ.R.SilvaC.A. and TrincadoM., Predictive torque and flux control without weighting factors, IEEE Trans. Ind. Electron.60(2) (2013), 681–690.
68.
Gonzalez-PrietoI.DuranM.J.AciegoJ.J.MartinC. and BarreroF., Model predictive control of six-phase inductionmotor drives using virtual voltage vectors, IEEE Trans. Ind. Electron.65(1) (2017), 27–37.
69.
ShiZ.SunX.LeiG.YangZ.GuoY. and ZhuJ., Analysis and optimization of radial force of permanent magnet synchronous Hub motors, IEEE Trans. Magn.56(2) (2020), 7508804.
70.
BojoiR.LazzariM.ProfumoF. and TenconiA., Digital field-oriented control for dual three-phase induction motor drives, IEEE Trans. Ind. Appl.39(3) (2003), 752–760.
71.
HabibullahM.LuD.D.-C.XiaoD. and RahmanM.F., A simplified finite-state predictive direct torque control for induction motor drive, IEEE Trans. Ind. Electron.63(6) (2016), 3964–3975.
72.
SunX.ZhouZ.ChenL.YangZ. and HanS., Performance analysis of segmented rotor switched reluctance motors with three types of winding connections for belt-driven starter generators of hybrid electric vehicles, COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering37(3) (2018), 1258–1270.
73.
CostaB.L.G.BaconV.D.da SilvaS.A.O. and AngélicoB.A., Tuning of a PI-MR controller based on differential evolution metaheuristic applied to the current control loop of a Shunt-APF, IEEE Trans. Ind. Electron64(6) (2017), 4751–4761.
74.
WanL.YangZ.SunX.ChenZ. and ChenL., Decoupling control of a 5-degree-of-freedom bearingless induction motor based on least squares support vector machine inverse, Advances in Mechanical Engineering8(10) (2016), 1–11.
75.
LaraJ. and ChandraA., Performance investigation of two novel HSFSI demodulation algorithms for encoderless FOC of PMSMs intended for EV propulsion, IEEE Trans. Ind. Electron65(2) (2018), 1074–1083.
76.
SunX.CaoJ.LeiG.GuoY. and ZhuJ., Speed sensorless control for permanent magnet synchronous motors based on finite position set, IEEE Trans. Ind. Electron.67(7) (2020), 6089–6100.
77.
HolakooieM.H.OjaghiM. and TaheriA., Modified DTC of a six-phase induction motor with a second-order sliding-mode MRAS-based speed estimator, IEEE Trans. Power Electron.34(1) (2019), 600–611.
78.
PanditJ.K.AwareM.V.NemadeR.V. and LeviE., Direct torque control scheme for a six-phase induction motor with reduced torque ripple, IEEE Trans. Power Electron.32(9) (2017), 7118–7129.
79.
SunX.SuB.ChenL.YangZ.YangY.QiaoW., A high-performance control scheme for reluctance type bearingless motors, Int. J. Appl. Electrom.53(3) (2017), 537–549.
80.
Gonzalez-PrietoI.DuranM.J.AciegoJ.J.MartinC. and BarreroF., Model predictive control of six-phase inductionmotor drives using virtual voltage vectors, IEEE Trans. Ind. Electron.65(1) (2018), 27–37.
81.
ZhangY.JiaoJ.LiuJ. and GaoJ., Direct power control of PWM rectifier with feedforward compensation of DC-Bus voltage ripple under unbalanced grid conditions, IEEE Trans. Ind. Appl.55(3) (2019), 2890–2901.
82.
SunX.DiaoK.YangZ.LeiG.GuoY. and ZhuJ., Direct torque control based on a fast modeling method for a segmented-rotor switched reluctance motor in HEV application, IEEE J. Emerg. Sel. Topics Power Electron (2019), doi:10.1109/JESTPE.2019.2950085.
83.
ChoY.BakY. and LeeK., Torque-ripple reduction and fast torque response strategy for predictive torque control of induction motors, IEEE Trans. Power Electron.33(3) (2018), 2458–2470.
84.
ZhouY. and ChenG., Predictive DTC strategy with fault-tolerant function for six-phase and three-phase PMSM series-connected drive system, IEEE Trans. Ind. Electron.65(11) (2018), 9101–9112.
85.
YangZ.ZhangD.SunX.SunW. and ChenL., Nonsingular fast terminal sliding mode control for a bearingless induction motor, IEEE Access (2017), 16656–16664.
86.
NikzadM.R.AsaeiB. and AhmadiS.O., Discrete duty-cyclecontrol method for direct torque control of induction motor drives with model predictive solution, IEEE Trans. Power Electron.33(3) (2018), 2317–2329.
87.
YangZ.WanL.SunX.ChenL. and ChenZ., Sliding mode control for bearingless induction motor based on a novel load torque observer, Journal of Sensors (2016), 8567429.
88.
SunX.SuB.ChenL.YangZ.XuX. and ShiZ., Precise control of a four degree-of-freedom permanent magnet biased active magnetic bearing system in a magnetically suspended direct-driven spindle using neural network inverse scheme, in: Mechanical Systems and Signal Processing, Vol. 88, 2017. pp. 36–48.
89.
MoraA.OrellanaÁ.JulietJ. and CárdenasR., Model predictive torque control for torque ripple compensation in variable-speed PMSMs, IEEE Trans. Ind. Electron.63(7) (2016), 4584–4592.
90.
LeiG.WangT.ZhuJ.GuoY. and WangS., System-level design optimization method for electrical drive systems—robust approach, IEEE Trans. Ind. Electron.62(8) (2015), 4702–4713.
91.
OdhanoS.BojoiR.FormentiniA.ZanchettaP. and TenconiA., Direct flux and current vector control for induction motor drives using model predictive control theory, IET Electric Power App.11(8) (2017), 1483–1491.
92.
WuM.SunX.ZhuJ.LeiG. and GuoY., An improved model predictive torque control for PMSM drives based on duty cycle optimization, IEEE Trans. Magn. (2020), doi:10.1109/TMAG.2020.3008495.
93.
SuJ.GaoR. and HusainI., Model predictive control based field weakening strategy for traction EV used induction motor, IEEE Trans. Ind. Appl.54(3) (2018), 2295–2305.
94.
SunX.ShiZ.WangS.ChenL.YangZ. and LiK., Linearizing control of a permanent magnet linear synchronous motor with inverse system scheme plus an internal model controller, Int. J. Appl. Electrom.55(4) (2017), 523–534.
95.
ZhangY.ZhangB.YangH.NorambuenaM. and RodriguezJ., Generalized sequential model predictive control of IM drives with field-weakening ability, IEEE Trans. Power Electron34(9) (2019), 8944–8955.
96.
SunX.ShenY.WangS.LeiG.YangZ. and HanS., Core losses analysis of a novel 16/10 segmented rotor switched reluctance BSG motor for hevs using nonlinear lumped parameter equivalent circuit model, IEEE/ASME Trans. Mechatron.23(2) (2018), 747–757.
97.
CortesP.RodriguezJ.SilvaC. and FloresA., Delay compensation in model predictive current control of a three-phase inverter, IEEE Trans. Ind. Electron.59(2) (2012), 1323–1325.
98.
SunX.ShenY.ZhouZ.YangZ. and ChenLong, Modeling and control of a bearingless permanent magnet synchronous motor, Int. J. Appl. Electrom.53(1) (2017), 151–165.
99.
SunX.DiaoK.LeiG.GuoY. and ZhuJ., Study on segmented-rotor switched reluctance motors with different rotor pole numbers for BSG system of hybrid electric vehicles, IEEE Trans. Veh. Technol.68(6) (2019), 5537–5547.
100.
ZhangY.BaiY.YangH. and ZhangB., Low switching frequency model predictive control of three-level inverter-fed IM drives with speed-sensorless and field-weakening operations, IEEE Trans. Ind. Electron.66(6) (2019), 4262–4272.
101.
SunX.SuB.ChenL.YangZ. and LiK., Design and analysis of interior composite-rotor bearingless permanent magnet synchronous motors with two layer permanent magnets, Bulletin of the Polish Academy of Sciences: Technical Sciences65(6) (2017), 833–843.
102.
YangX.ZhangL.XieW. and ZhangJ., Sequential and iterative distributed model predictive control of multi-motor driving cutterhead system for TBM, IEEE Access7 (2019), 46977–46989.
103.
LeeJ.S. and LorenzR.D., Robustness analysis of deadbeat-direct torque and flux control for IPMSM drives, IEEE Trans. Ind. Electron.63(5) (2016), 2775–2784.
104.
SunX.WuM.YangZ.LeiG. and GuoY., High-performance control for a permanent-magnet linear synchronous generator using state feedback control scheme plus grey wolf optimization, IET Electr. Power Appl.14(5) (2020), 771–78014(5): 771–780, 2020.
105.
AciegoJ.J.PrietoI.G. and DuranM.J., Model predictive control of six-phase induction motor drives using two virtual voltage vectors, IEEE J. Em. Sel. Top P7(1) (2019), 321–330.
106.
YuY.SunX. and ZhangW., Modeling and decoupling control for rotor system in magnetic levitation wind turbine, IEEE Access (2017), 15516–15528.
107.
PanditJ.K.AwareM.V.NemadeR.V. and LeviE., Direct torque control scheme for a six-phase induction motor with reduced torque ripple, IEEE Trans. Power Electron.32(9) (2017), 7118–7129.
108.
SunX.WuJ.WangS.DiaoK. and YangZ., Analysis of torque ripple and fault-tolerant capability for a 16/10 segmented switched reluctance motor in HEV applications, COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering38(6) (2019), 1725–1737.
109.
SuJ.GaoR. and HusainI., Model predictive control based field-weakening strategy for traction EV used induction motor, IEEE Trans. Ind. Electron.54(3) (2018), 2295–2305.
110.
SaurM.Gaona ErazoD.E.ZdravkovicJ.LehnerB.GerlingD. and LorenzR.D., Minimizing torque ripple of highly saturated salient pole synchronous machines by applying DB-DTFC, IEEE Trans. Ind. Appl.53(4) (2017), 3643–3651.
111.
AhmedA.A.KohB.K. and LeeY.I., A comparison of finite control set and continuous control set model predictive control schemes for speed control of induction motors, IEEE Trans. Ind. Inform.14(4) (2018), 1334–1346.
112.
CheH.S.DuranM.J.LeviE.JonesM.HewW. and RahimN.A., Postfault operation of an asymmetrical six-phase induction machine with single and two isolated neutral points, IEEE Trans. Power Electron.29(10) (2014), 5406–5416.
113.
SunX.DiaoK.LeiG.GuoY. and ZhuJ., Real-time HIL emulation for a segmented-rotor switched reluctance motor using a new magnetic equivalent circuit, IEEE Trans. Power Electron.35(4) (2020), 3841–3849.
114.
WangY.WangX.XieW.WangF.DouM.KennelR.M., Deadbeat model-predictive torque control with discrete space-vector modulation for PMSM drives, IEEE Trans. Ind. Electron.64(5) (2017), 3537–3547.
115.
SuD.ZhangC. and DongY., Finite-state model predictive current control for surface-mounted permanent magnet synchronous motors based on current locus, IEEE Access5 (2017), 27366–27375.
116.
SunX.XueZ.HanS.XuX.YangZ. and ChenL., Design and analysis of a novel 16/10 segmented rotor SRM for 60 V belt-driven starter generator, Journal of Magnetics21(3) (2016), 393–398.
117.
YooA. and SulS., Design of flux observer robust to interior permanent magnet synchronous motor flux variation, IEEE Trans. Ind. Appl.45(5) (2009), 1670–1677.
118.
MorioJ., Global and local sensitivity analysis methods for a physical system, European Journal of Physics32(6) (2011), 1577–1583.
119.
SunX.ShiZ.LeiG.GuoY. and ZhuJ., Multi-objective design optimization of an IPMSM based on multilevel strategy, IEEE Trans. Ind. Electron. (2020), doi:10.1109/TIE.2020.2965463.
120.
OdhanoS.BojoiR.FormentiniA.ZanchettaP. and TenconiA., Direct flux and current vector control for induction motor drives using model predictive control theory, IET Electric Power App.11(8) (2017), 1483–1491.
121.
LuoY. and LiuC., Multi-vector-based model predictive torque control for a six-phase PMSM motor with fixed switching frequency, IEEE Trans. Energy Convers.34(3) (2019), 1369–1379.
122.
YanL.DouM.HuaZ.ZhangH. and YangJ., Robustness improvement of FCS-MPTC for induction machine drives using disturbance feedforward compensation technique, IEEE Trans. Power Electron.34(3) (2019), 2874–2886.
123.
WangY.XieW.WangX.YangW.DouM.SongS., Fast response model predictive torque and flux control with low calculation effort for PMSMs, IEEE Trans. Ind. Inform. (2019), 1551–3203.
