Frequency and temperature dependence of the hysteresis loops (both major and minor hysteresis loops) of well-known materials such as pure Fe and pure Ni in the as-cast state and after a heat treatment, were measured and analyzed. Furthermore temperature dependent magnetostriction of the as-cast and annealed Ni sample were measured and residual stresses were estimated by assuming the magnetoelastic energy as the origin of coercivity Hc. The hysteresis measurements were made on fully automized hysteresigraph which is handled by a labview program. The system works with ring- or frame-shaped samples in the frequency range from 0.1 Hz to 2 kHz and in the temperature range from −77 K to 493 K.
GrössingerR., Handbook of Materials Measurement Methods, In: CzichosH.SaitoT. and SmithL. (eds), Springer Verlag, 2006, pp. 485–530. Chap. 10.
2.
SchlegelJ.P.BatistelaN.J.SadowskiN.Kuo-PengP.BastosJ.P.A. and RigoniM., Testing strategies to evaluate non-oriented electrical steels losses, Journal of Microwaves, Optoelectronics and Electromagnetic Applications11(2) (2012), 304–315.
3.
KurosakiY.MogiH.FujiiH.KubotaT. and ShiozakiM., Importance of punching and workability in non-oriented electrical steel sheets, Journal of Magnetism and Magnetic Materials320 (2008), 2474–2480.
4.
KaiY.TsuchidaY.TodakaT. and EnokizonoM., Effect of residual stress on magnetic properties of motor cores, International Journal of Applied Electromagnetics and Mechanics45 (2014), 903–908.
5.
GrössingerR.MehboobN.KriegischM.BachmaierA. and PippanR., Freuency dependence of the coercivity of soft magnetic materials, IEEE Transaction on Magnetics48(4) (2012), 1473–1476.
6.
GrössingerR.SortaS.KriegischM.DessovicP. and MohnP., New magnetoelastic experiments, Journal of Electrical Engineering66(7) (2015), 5–9.
7.
SongXu. and Merrill StressR.T., Grain size, and magnetic stability of magnetite, Journal of Geophysical Research97 (1992), 4321–4329.
8.
RossiniN.S.DassistiM.BenyounisK.Y. and OlabiA.G., Methods of measuring residual stresses in components, Materials and Design35 (2012), 572–588.
9.
ShuiG.LiC. and YaoK., Non-destructive evaluation of the damage of ferromagnetic steel using metal magnetic memory and nonlinear ultrasonic method, International Journal of Applied Electromagnetics and Mechanics47 (2015), 1023–1038.
10.
ZhangaH.LiaobL.ZhaobR.ZhouaJ.YangcM. and ZhaoaY., A new judging criterion for corrosion testing of reinforced concrete based on self-magnetic flux leakage, International Journal of Applied Electromagnetics and Mechanics54 (2017), 123–130.
11.
SchajerG.S., Practical Residual Stress Measurement Methods, First edn, John Wiley & Sons, Ltd., 2013.
12.
TomasI., Non-destructive magnetic adaptive testing of ferromagnetic materials, J. Magn. Magn. Materials268 (2004), 178–185.
13.
OserP., Ein hysteresograph zur charakterisierungweichmagnetischer materialien (A Hysteresograph for characterization of soft magnetic materials), in: Diplomwork TU Vienna, 2008.
14.
PeterK.KuczmannM.FüziJ. and IvanyiA., Hysteresis measurement in LabView, Physica B Condensed Matter343(1) (2004), 357–363.
15.
CornerW.D. and HuntG.H., The temperature dependence of magnetostriction in a nickel crystal, Proceedings of the Physical Society. A68(3) (1955), 113.
16.
CornerW.D. and HutchinsonF., The saturation magnetostriction of nickel crystals at low temperatures, Proceedings of the Physical Society72(6) (1958), 1049.
17.
BirssR.R. and LeeE.W., The saturation magnetostriction constants of nickel within the temperature Range - 196° to 365 °C, Proceedings of the Physical Society76(4) (1960), 502.
18.
BirssR.R. and LeeE.W., Measurement of magnetostriction within the temperature range - 196 to 400 °C, Journal of Scientific Instruments37(3) (1960), 225.
19.
PolakCh.SinneckerJ.P.GrossingerR.KnobelM.TurtelliR.S. and KussC., Pinning fields in amorphous materials, Journal of Applied Physics73(10) (1993), 5727–5729.
20.
SinneckerJ.P.GrössingerR.TurtelliR.S.ExelG.GreifenederG. and KußC., Quenched-in stresses in amorphous ribbons, Journal of Magnetism and Magnetic Materials133(1) (1994), 20–23.
