Demands for circuits with higher density in modern electronics have imposed the necessity for electronic components with compact size, high frequency operational range, high efficiency and cost-effectiveness. This requires the new design of electronic components, such as multi-phase coupled inductor with ferrite Ni-Zn core which is studied in this paper. Printed circuit board (PCB) technology was used to develop six symmetrical conductive copper coils, while specially designed innovative ferrite core has been mounted through the PCB, to create a compact component. For ferrite core, two Ni-Zn materials denoted with C2025 and CN20 were used. Testing of the component has been performed using the following characterization methods: (a) structural characterization using scanning electron microscope; (b) electrical characterization using Impedance analyzer; and (c) mechanical characterization using Nanoindenter. It can be concluded from tests carried out (load-displacement curves and hardness module) that designed and manufactured component can be exposed to mechanical stress and vibrations and can be used in applications such as DC/DC convertors.
WibowoS.A.TingZ.KonoM.TauraT.KoboriY.OndaK. and KobayashiH., Analysis of coupled inductors for low-ripple fast-response buck converter, IEICE Trans FundamentalsE92-A (2009).
2.
KosaiH.McNealS.JordanB.ScofieldJ.RayB. and TurgutZ., Coupled Inductor Characterization for a High Performance Interleaved Boost Converter, IEEE Transactions on Magnetics45 (2009), 4812–4815.
3.
PrabhakaranS.O’DonnellT.SullivanC.R.BrunetM.RoyS. and O’MathunaC., Microfabricated coupled inductors for integrated power converters, Journal of Magnetism and Magnetic Materials290–291 (2005), 1343–1346.
4.
LimM.H.Van WykJ.D.LeeF.C. and NgoK.D.T., A class of ceramic-based chip inductors for hybrid integration in power supplies, IEEE Transactions on Power Electronics23 (2008).
5.
LossouarnB.ThierryO.AucejoM. and DeuJ.F., Comparison of passive inductor designs for piezoelectric shunt damping, Active and Passive Smart Structures and Integrated Systems, edited by G. Park, Proc. of SPIE9799 (2016).
6.
VaralaxmiN. and SivakumarK., Development of Non-Shrinking Soft Ferrite Composition Useful for Microinductors Applications, World Journal of Condensed Matter Physics1 (2011), 105–119.
7.
ZumelP.GarciaO.CobosJ.A. and UchedaJ., Magnetic integration for interleaved converters, in: Appl. Power Electronics Conf. and Expo, APEC ’03, Eighteenth Annual IEEE, 2, 2003, pp. 1143–1149.
8.
DongY., Investigation of Multiphase Coupled-Inductor Buck Converters in Point-of-Load Applications, PhD Dissertation, Virginia Tech, 2009.
9.
WongP.L.XuP.YangP. and LeeF.C., Performance improvements of interleaving VRMs with coupling inductors, IEEE Transactions on Power Electronics16 (2001), 499–507.
10.
LiJ.SullivanC.R. and SchultzA., Coupled-inductor design optimization for fast-response low voltage DC-DC converters, in: Proc. of APEC 2002 – Applied Power Electronics Conf., 2, 2002, pp. 817–823.
11.
PengliZ.YanminW. and RongS., Synthesis and Magnetic Properties of Ni-Zn Ferrite @polyaniline/Epoxy Composites for Embedded Inductor Applications, International Symposium on Advanced Packaging Materials (APM 2011) (2011).
12.
HouD.MuM.LeeF.C. and LiQ., New High-Frequency Core Loss Measurement Method With Partial Cancellation Concept, IEEE Transactions on Power Electronics32 (2017), 2987–2994.
13.
Gutierrez-LopezJ.Rodriguez-SeninE.PastorJ.Y.ParisM.A.MartinA.LevenfeldB. and VarezA., Microstructure, magnetic and mechanical properties of Ni-Zn ferrites prepared by powder injection molding, Powder Technology210 (2011), 29–35.
14.
AhnT.H.UmK.K.ChoiJ.K.KimD.H.OhK.H.KimM. and HanH.N., Small-scale mechanical property characterization of ferrite formed during deformation of super-cooled austenite by nanoindentation, Materials Science and Engineering A523 (2009), 173–177.
15.
SenP.DeyA.MukhopadhyayA.K.BandyopadhyayS.K. and HimanshuA.K., Nanoindentation behavior of nano BiFeO3, Ceramics International38 (2012), 1347–1352.
16.
MengZ. and JiangD., Measuring Mechanical Properties of Zirconia Dental Crowns by Nanoindentation, Key Engineering Materials591 (2014), 150–153.
17.
CostinW.L.LavigneO. and KotousovA., A study on the relationship between microstructure and mechanical properties of acicular ferrite and upper bainite, Materials Science & Engineering A663 (2016), 193–203.
18.
HeB.B.ZhuK. and HuangM.X., On the nanoindentation behavior of complex ferritic phases, Philosophical Magazine Letters94 (2014), 439–446.
19.
WangS.F.YangH.C.HsuY.F. and HsiehC.K., Effects of SnO2, WO3, and ZrO2, addition on the magnetic and mechanical properties of NiCuZn ferrites, Journal of Magnetism and Magnetic Materials374 (2015), 381–387.
20.
WangS.F.HsuY.F.LiuY.X. and HsiehC.K., Effects of microstructure and CaO addition on the magnetic and mechanical properties of NiCuZn ferrites, Journal of Magnetism and Magnetic Materials394 (2015), 470–476.
21.
XingX.L.ZhouY.F.ZhuoY.G.WangJ.B.YangY.L. and YangQ.X., Effects of rare earth oxide Y2O3 on microstructure and mechanical properties of proeutectoid ferrite/granular bainitic coating, J. Mater. Res.31 (2016), 1702–1710.
22.
ReddyN.R.RamanaM.V.RajithaG.SivakumarK.V. and MurthyV.R.K., Stress insensitive NiCuZn ferrite compositions for microinductor applications, Current Applied Physics9 (2009), 317–323.
23.
MatsuoY.OnoK.HashimotoT. and NakaoF., Magnetic Properties and Mechanical Strength of MnZn Ferrite, IEEE Transactions on Magnetics37 (2001), 2369–2372.
24.
StojanovićG.LečićN.DamnjanovićM. and ŽivanovL.J., Electrical and temperature characterization of NiZn ferrites, International Journal of Applied Electromagnetics and Mechanics35 (2011), 165–176.
25.
StojanovićG.DamnjanovićM.DesnicaV.ŽivanovL.J.RaghavendraR.BellewP. and McloughlinN., High performance zig-zag and meander inductors embedded in ferrite material, Journal of Magnetism and Magnetic Materials2 (2006), 76–83.
26.
LečićN.ChandranA.StojanovićG. and PajkanovićA., Low-Cost Multi-Phase DC/DC Buck Converter Test Circuit with Simple Control for Testing Multi-Phase Inductors, in: International Conference INDEL2014, Nov. 2014, Bosnia & Herzegovina.
