This paper presents the performance analysis and experiment of vibration and noise in transformer cores, considering the different magnetostriction influence of electrical steel sheets in the lamination rolling direction and perpendicular to this direction. Firstly, the magnetostrictive curves are obtained by the experimental test, which are utilized for the accurate setup in the finite element method (FEM). Then, the vibration and noise of a single phase power transformer are analyzed by FEM. Finally, the simulation results are verified by the experimental results under the DC bias.
KappenmanJ.G., AlbertsonV.D., MohanN. and PorterJ.W., Investigation of Geomagnetically Induced Currents in the Proposed Winnipeg-Duluth-Twin Cities 500 kV Transmission Line, Research Project 1205-1, 1981, pp. 1-178.
2.
MohammedO.A. et al. Acoustic Noise Signal Generation Due to Magnetostrictive Effects in Electrical Equipment, Twenty-Second National Radio Science Conference, Cairo-Egyp, 2005, pp. 45-52.
3.
GhalamestaniS.G. et al. Magnetostrictive Deformation of a Transformer Comparison Between Calculation and Measurement, International Journal of Applied Electromagnetics and Mechanics (3), 2014, 295-299.
4.
ChangY.H. et al. Magnetomechanical Vibrations of Three-Phase Three-Leg Transformer With Different Amorphous-Cored Structures, IEEE Trans. on Magn (10), 2011, 2780-2783.
5.
BaiB. and WangJ., Coupled multi-physics Analysis of Vibration and Noise Due to Magnetostriction and Magnetic Force Considering DC Bias, Conference on Electromagnetic Field Computation, Annecy, France, 2014, pp. 1-4.
