This paper presents the design concept of a magnetically levitated linear slider with non-contact energy transfer, and an analysis of the major components of the design. An open-end generator is introduced to achieve non-contact energy transfer to the levitated platform. Utilization of non-contact energy transfer will overcome difficulties related to charging batteries. Furthermore, we have proposed an improvement for a hybrid electromagnet to achieve better passive lateral alignment under zero power control. The results of FEM analysis and practical testing show that the concept is promising for further study with a prototype system.
KimC.-H., LeeJ.-M., HanH.-S. and KimB.-S., Levitation and Thrust Control of a Maglev LCD Glass Conveyor, Proceedings of the IECON 2011, Melbourne (2011), pp. 610-615.
2.
MorishitaM. and AzukizawaT., Zero power control of electromagnetic levitation system, Electrical Engineering in Japan108 (1988), 111-120.
3.
KimK.-J., HanH.-S., KimC.-H. and YangS.-J., Dynamic Analysis of a Maglev Conveyor Using an EM-PM Hybrid Magnet, Journal of Electrical Engineering and Technology (August 2013), 742-749.
4.
SunZ., CheungN.C., PanJ., ZhaoS. and GanW.-C., Design and Simulation of a Magnetic Levitated Switched Reluctance Linear Actuator System for High Precision Application, IEEE International Symposium on Industrial Electronics (July 2008), 624-629.
5.
WangJ., XiaZ.P. and HoweD., Three-Phase Modular Permanent Magnet Brushless Machine for Torque Boosting on a Downsized ICE Vehicle, IEEE Transactions on Vehicular Technology54 (May 2005), 809-816.
