The paper proposes an optimization approach to address the modeling and sizing complexities of Brushless Doubly-Fed Reluctances Machines. A semi-analytical model and a reluctance network model are coupled to a deterministic optimization algorithm where several inputs and outputs parameters can be constrained to solve sizing equations iteratively by maximizing or minimizing an objective function. A Pareto Front strategy is used to illustrate the models capabilities, highlighting the trade-offs on the design of this kind of electrical machines. The optimization model provides fast results to define a first design, reducing the number of unknown parameters of early development stages. This saves computation time and computer resources in the design process compared to Finite Element Analysis.
LiH. and ChenZ., Overview of different wind generator systems and their comparisons, IET Renewable Power Generation2(2) (2008), 123. doi: 10.1049/iet-rpg:20070044.
2.
KnightA.M., BetzR.E. and DorrellD.G., Design and Analysis of Brushless Doubly Fed Reluctance Machines, IEEE Transactions on Industry Applications49(1) (Jan 2013), 50-58. doi: 10.1109/TIA.2012.2229451.
3.
XuL., GuanB., LiuH., GaoL. and TsaiK., Design and control of a high-efficiency Doubly-Fed Brushless machine for wind power generator application, in 2010 IEEE Energy Conversion Congress and Exposition. IEEE, Sep 2010, pp. 2409-2416. doi: 10.1109/ECCE.2010.5617911. ISBN 978-1-4244-5286-6.
4.
LiaoY., XuL. and ZhenL., Design of a doubly fed reluctance motor for adjustable-speed drives, IEEE Transactions on Industry Applications32(5) (1996), 1195-1203. doi: 10.1109/28.536883.
5.
LiangF., XuL. and LipoT., D-q analysis of a variable speed doubly AC excited reluctance motor, Electric Machines and Power Systems19 (1991), 125-138.
6.
BetzR.E. and JovanovićM.G., Introduction to the Space Vector Modeling of the Brushless Doubly Fed Reluctance Machine, Electric Power Components and Systems31(8) (Aug 2003), 729-755. doi: 10.1080/15325000390219785.
7.
PowellM.J.D., Mathematical Programming Essays in Honor of George B. Dantzig Part II - On the quadratic programming algorithm of Goldfarb and Idnani, ser. Mathematical Programming Studies, CottleR.W., Ed. Berlin, Heidelberg: Springer Berlin Heidelberg, 1985, vol. 25, pp. 46-61. ISBN 978-3-642-00920-4.
8.
EnciuP., WurtzF., GerbaudL. and DelinchantB., Automatic differentiation for electromagnetic models used in optimization, COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering28(5) (2009), 1313-1326. doi: 10.1108/03321640910969557.
9.
Cades, Cades Solutions - http://vesta-system.cades-solutions.com/. Version 2.9.2, Grenoble, 2012.
10.
StaudtT., Brushless Doubly-Fed Reluctance Machine Modeling, Design and Optimization, Ph.D. dissertation, (PhD Thesis). Univ. Grenoble Alpes, G2Elab-CNRS, F-38000 Grenoble, France and Federal Univ. of Santa Catarina, Grucad, Florianopolis, Brazil, 2015.
11.
StaudtT., WurtzF., GerbaudL., BatistelaN.J. and Kuo-PengP., An optimization-oriented sizing model for brushless doubly fed reluctance machines: development and experimental validation, Electric Power Systems Research (Accepted for publication), 2015. doi: 10.1016/j.epsr.2015.10.029.
12.
KrauseP.C., WasynczukO., SudhoffS.D. and PekarekS., Analysis of Electric Machinery and Drive Systems, 3rd ed. Piscataway, New Jersey: Wiley-IEEE Press, 2013. ISBN 978-1-118-02429-4.
13.
DoganH., GarbuioL., Nguyen-XuanH., DelinchantB., FoggiaA. and WurtzF., Multistatic Reluctance Network Modeling for the Design of Permanent-Magnet Synchronous Machines, IEEE Transactions on Magnetics49(5) (May 2013), 2347-2350. doi: 10.1109/TMAG.2013.2243426.
14.
DelinchantB., DuretD., EstrabautL., GerbaudL., Nguyen HuuH., Du PelouxB., RakotoarisonH., VerdiereF. and WurtzF., An optimizer using the software component paradigm for the optimization of engineering systems, COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering26(2) (Apr 2007), 368-379. doi: 10.1108/03321640710727728.
15.
EnciuP., WurtzF. and GerbaudL., Proposal of a Language for Describing Differentiable Sizing Models for Electromagnetic Devices Design, in 14th Biennial IEEE Conference on Electromagnetic Field Computation - CEFC, Chicago, May 9-12, 2010.
16.
Du PelouxB., GerbaudL., WurtzF., LeconteV. and DorschnerF., Automatic generation of sizing static models based on reluctance networks for the optimization of electromagnetic devices, IEEE Transactions on Magnetics42(4) (Apr 2006), 715-718. doi: 10.1109/TMAG.2006.872010.
17.
DorrellD.G., KnightA.M., SongW.K. and BetzR.E., Saturation and Ducting Effects in a Brushless Doubly-Fed Reluctance Machine, IEEE Transactions on Magnetics49(7) (Jul 2013), 3933-3936. doi: 10.1109/TMAG.2013.2251458.
18.
JovanovicM., BetzR. and YuJ., The use of doubly fed reluctance machines for large pumps and wind turbines, IEEE Transactions on Industry Applications38(6) (Nov 2002), 1508-1516. doi: 10.1109/TIA.2002.804749.
