Effect of temperature on crystallinity of carbonate apatite foam prepared from α-tricalcium phosphate by hydrothermal treatment

Abstract

The effect of temperature on crystallinity of carbonate apatite (CAp) foam prepared from α-tricalcium phosphate (α-TCP) foam by hydrothermal treatment was investigated in the present study. The α-TCP foams were prepared through a conventional sintering method using polyurethane foam as template. Then, the resultant α-TCP foams were hydrothermally treated with Na₂CO₃ aqueous solution at 100°C, 150°C and 200°C for 72 h. After hydrothermal treatment, the cancellous bone-like macroporous structure of the α-TCP foams was maintained. However, microscopic morphology of the foams' frame significantly changed after the 72 h treatment period. The smooth surface of α-TCP foam disappeared and the whole surface was covered with plate-like deposits. The plate-like deposits treated at 150°C and 200°C had smooth surface while those treated at 100°C were constructed from spherical particles of approximately 200 nm in diameter. The results of X-ray diffraction and Fourier transform infrared analysis showed that α-TCP was completely converted to CAp and the crystallinity of CAp prepared at 100°C was significantly lower than those prepared at 150°C and 200°C. Hydrothermal treatment of α-TCP foam at 100°C allowed the formation of low-crystalline CAp foam but complete conversion needs a longer treatment period.