Length-Based Vehicle Classification Schemes and Length Bin Boundaries

Abstract

Vehicle classification data are an important component of traffic-monitoring programs. Although most vehicle classification conducted in the United States is axle based, some applications could be supplemented or replaced by length-based data. The typically higher deployment cost and reliability issues associated with collecting axle-based data as compared with length-based data present a challenge. This paper reports on analyses of alternative length-based vehicle classification schemes and appropriate length bin boundaries. The primary analyses use data from a set of 13 Long-Term Pavement Performance weigh-in-motion sites, all in rural areas; additional analyses are conducted with data from 11 Michigan Department of Transportation weigh-in-motion sites located in rural and small urban areas and one site located in an urbanized area. For most states, the recommended length-based vehicle classification scheme is a four-bin scheme (motorcycles, short, medium, and long) with an optional very long bin recommended for use by states in which significant numbers of longer combination vehicles operate.