Low-Temperature Fracture Characteristics of Selected Warm-Mix Asphalt Concretes

Abstract

Warm-mix asphalt (WMA) technology is developed by lowering the binder melting point, which may cause WMA to be weak against rutting at high service temperatures. Much research has been done on the high-temperature characteristics of WMA mixtures, but the low-temperature fracture behavior that leads to cracking has not been well evaluated. Because WMA is produced at lower temperatures with a lower aggregate heating, the behavior at the interface where the binder is coating aggregate is in question at low temperatures. In this study, 13-mm, dense-grade WMA mixtures were produced by using WMA binders. Beam specimens were prepared for fracture toughness (K_IC) evaluation at −20°C by a three-point bending test. The results and analyses revealed that the K_IC values of WMA mixtures at −20°C were similar to or better than those of HMA mixtures, even though they were produced at temperatures 30°C or 40°C lower than HMA mixtures.

Get full access to this article

View all access options for this article.

References

Fracture Toughness. Wikipedia, http://en.wikipedia.org/wiki/Fracture_toughness. Accessed 2010.

Committee 89-FMT. Fracture Mechanics Test Methods for Concrete. Research Report 80-2. RILEM, Chapman Hall, London, 1991.

El Hussein

H. M.

, and Halim

A. O. A.

Differential Thermal Expansion/Contraction: A Mechanical Approach to Adhesion in Asphalt Concrete. Canadian Journal of Civil Engineering, Vol. 20, No. 3, 1993, pp. 366–373.

El Hussein

H. M.

, Kim

K.W.

, and Ponniah

Asphalt Concrete Damage Associated With Extreme Low Temperatures. Journal of Materials in Civil Engineering, Vol. 10, No. 4, 1998, pp. 269–274.

Kim

K.W.

, and El Hussein

H. M.

Effect of Differential Thermal Contraction on Fracture Toughness of Asphalt Materials at Low Temperatures. American Journal of Physics, Vol. 64, 1995, pp. 474–496.

Kim

K.W.

, Kwon

S.J.

, Doh

Y.S.

, and Park

T. S

. Fracture Toughness of Polymer-Modified Asphalt Concrete at Low Temperatures. Canadian Journal of Civil Engineering, Vol. 30, No. 2, 2003, pp. 406–413.

Kim

K.W.

, and El Hussein

H. M.

Variation of Fracture Toughness of Asphalt Concrete Under Low Temperatures. Construction and Building Materials, Vol. 11, No. 7–8, 1997, pp. 403–411.

Kwon

S. Z.

Low-Temp Fracture Behavior of Polymer-Modified Asphalt Concrete. PhD dissertation. Graduate School, Kangwon National University, Chuncheon, Gangwon-do, South Korea, 1999.

Kwon

S.Z.

, Doh

Y.S.

, and Kim

K. W.

Development of Modified ECM Considering the Change of Poisson's Ratio and Study on Low-Temperature Characteristics of Asphalt Concrete. Journal of Korean Society of Pavement Engineers, Vol. 3, No. 1, 2001, pp. 185–197.

10.

Kim

K.W.

, Kwon

S.Z.

, Doh

Y.S.

, and Li

X. F.

Evaluation of Poisson's Ratio of Polymer Modified Asphalt Concretes. Journal of Korean Society of Agricultural Engineers, Vol. 41, No. 5, 1999, pp. 104–111.

11.

Karihalroo

B.L.

, and Nallathambi

An Improved Effective Crack Model for the Determination of Fracture Toughness of Concrete. Cement and Concrete Research, Vol. 19, No. 4, 1989, pp. 603–610.

12.

Karihalroo

B.L.

, and Nallathambi

Effective Crack Model for the Determination of Fracture Toughness (K_IC) of Concrete. Engineering Fracture Mechanics, Vol. 35, No. 4–5, 1990, pp. 637–645.

13.

Yoo

M.-Y.

Evaluation of Fracture Toughness of Warm-Mix Asphalt Concrete at Low Temperatures. MS thesis. Graduate School, Kangwon National University, Chuncheon, Gangwon-do, South Korea, 2010.

14.

Production and Construction Guide for Asphalt Mixtures. Korea Ministry of Land, Transport, and Maritime Affairs, Seoul, South Korea, 2009.

15.

Doh

Y.S.

, Yun

K.K.

, Amirkhanian

S.N.

, and Kim

K. W.

Framework for Developing Static Strength Test for Measuring Deformation Resistance of Asphalt Concrete Mixtures. Construction and Building Materials, Vol. 21, No. 12, 2007, pp. 2047–2058.

16.

Kim

K.W.

, Amirkhanian

S.N.

, Kim

H.H.

, Lee

M.S.

, and Doh

Y. S.

A New Static Strength Test for Characterization of Rutting of Dense-Graded Asphalt Mixtures. Journal of Testing and Evaluation, Vol. 39, No. 1, 2011.

17.

Kim

K.W.

, Doh

Y.S.

, and Amirkhanian

S. N.

Feasibility of Deformation Strength for Estimation of Rut Resistance of Asphalt Concrete. Road Materials and Pavement Design, Vol. 5, No. 3, 2004, pp. 303–322.