Bottom–Up Fatigue Cracking of Low-Volume Flexible Pavement Analysis from Instrumented Testing

Abstract

This paper provides general design guidance for bottom–up fatigue cracking of thin flexible pavements. Throughout the paper the need for the data is shown alongside the methods for obtaining the data and potential uses of the findings. The data were gathered as part of a study to evaluate geosynthetics in thin flexible pavements. Data were collected from strain gauges, pressure cells, and thermocouples in instrumented sections on a low-volume road in Arkansas after approximately 2,100 passes of controlled traffic with an FHWA Category 5 vehicle. More than 30,000 asphalt strain measurements were obtained. The distribution of asphalt strain measurements was heavily skewed, while the distribution of pressure measurements in the base layer was normal. Finite element analysis was used to account for temperature effects, which made the asphalt strain distributions fairly normal. Plots of damage were developed using transfer functions, finite element modeling, and the measured strains. The plots are central to the design approach, which improves the state of knowledge in mechanistic–empirical low-volume road design.

Get full access to this article

View all access options for this article.

References

Cooley

L. A.

Howard

I. L.

Baumgardner

and Ross

. Case History on Surface Initiated Cracks on Urban Thoroughfare Pavements. Proc., Sixth RILEM International Conference on Cracking in Pavements, Chicago, Ill., June 16–18, RILEM, Paris, 2008, pp. 843–852.

Hall

K. D.

and Elliott

R. P.

. ROADHOG—A Flexible Pavement Overlay Design Procedure. In Transportation Research Record 1374, TRB, National Research Council, Washington, D.C., 1992, pp. 9–18.

Warren

K. A.

and Howard

I. L.

. Sensor Selection, Installation, and Survivability in a Geosynthetic-Reinforced Flexible Pavement. Geosynthetics International, Vol. 14, No. 5 2007, pp. 298–315.

Howard

I. L.

and Warren

K. A.

. Innovative Data Acquisition for Heavily Instrumented Flexible Pavements. Journal of Computing in Civil Engineering, Vol. 22, No. 3 2008, pp. 206–215.

Howard

I. L.

Warren

K. A.

and Lord

C. R.

. Statistical Analysis of Unbound Subgrade Pressure Measurements. In Proc., Geo Congress 2008, Characterization, Monitoring, and Modeling of GeoSystems-Geotechnical Special Publication No. 179, ASCE, New Orleans, La., March 9–12, ASCE, Reston, Va., 2008, pp. 990–997.

Al-Khateeb

Shenoy

and Gibson

. Mechanistic Performance Analyses of the FHWA's Accelerated Loading Facility Pavements. Journal of the Association of Asphalt Paving Technologists, Vol. 76, 2007, pp. 737–770.

Carpenter

Fatigue Performance of IDOT Mixtures: IHR-R39 Project-Extended Life of HMA Pavements. Report prepared for the Illinois Cooperative Highway and Transportation Research Program, Illinois Department of Transportation, Springfield, 2005.

Research and Development of the Asphalt Institute Thickness Design Manual (MS-1), 9th ed. Research Report 82-2. Asphalt Institute, Lexington, Ky., 1982.

Howard

I. L.

and Warren

K. A.

. Performance Analysis of Heavily Instrumented Flexible Pavement. In Proc., Geo Congress 2008, Characterization, Monitoring, and Modeling of GeoSystems-Geotechnical Special Publication No. 179, New Orleans, La., March 9–12, ASCE, Reston, Va., 2008, pp. 348–355.

10.

Howard

I. L.

Full-Scale Field Study and Finite Element Modeling of a Flexible Pavement Containing Geosynthetics. PhD dissertation. University of Arkansas, Fayetteville, 2006.

11.

Howard

I. L.

and Warren

K. A.

. Finite Element Modeling of Instrumented Flexible Pavements Under Stationary Transient Loading. Journal of Transportation Engineering, Manuscript TE/2007/023751, ASCE, Reston, Va., 2009 (forthcoming).