Soil-Structure Interaction and Imperfect Trench Installations for Deeply Buried Corrugated Polyvinyl Chloride Pipes

Abstract

The imperfect trench installation method has been used to reduce earth pressure on buried rigid pipes by inducing positive soil arching over the pipe. Because they are relatively flexible, corrugated thermoplastic pipes induce a small amount of positive soil arching. Therefore, there has been little research on the effects of imperfect trench installation on flexible pipes, such as those fabricated with corrugated thermoplastic. A study was done of the soil-structure interaction for corrugated poly-vinyl chloride (PVC) pipes and the efficiency of the imperfect trench method for their installation. The soil-structure model was simulated with the Duncan soil model and Selig soil parameters by using the finite element method. The geometry of a soft zone was optimized to maximize the earth load reduction effects for imperfect trench installations. The optimization process was based on parametric studies of the geometry and location of the soft zone, combined with bedding and sidefill treatments to reduce earth pressures. Predictor equations for earth load, maximum stress, and deflection of corrugated PVC pipes were formulated that incorporate the proposed optimum soft zone geometry and installation techniques. Parametric studies revealed that the optimum geometry of the soft zone in the proposed imperfect trench installations could reduce the maximum wall stress in corrugated PVC pipes by 85%.

Get full access to this article

View all access options for this article.

References

Spangler

M. G.

The Structural Design of Flexible Culverts. Iowa State College Bulletin 30, Vol. 11, 1941.

ACPA Concrete Pipe Technology Handbook. American Concrete Pipe Association, Vienna, Va., 1994.

Marston

Second Progress Report to the Joint Concrete Culvert Pipe Committee. Iowa Engineering Experimental Station, Ames, 1922.

Brown

C. B.

Forces on Rigid Culverts Under High Fills. Journal of Structural Division, Vol. 93, No. 5, 1967, pp. 195–215.

McAffee

R. P.

, and Valsangkar

A. J.

Performance of an Induced Trench Installation. In Transportation Research Record: Journal of the Transportation Research Board, No. 1936, Transportation Research Board of the National Academies, Washington, D.C., 2005, pp. 230–237.

Yoo

C. H.

, Parker

, and Kang

Bedding and Fill Heights for Concrete Roadway Pipe and Box Culverts. Highway Research Center, Auburn University, Auburn, Ala., 2005.

LRFD Bridge Design Specifications, 3rd ed. AASHTO, Washington, D.C., 2004.

Burns

J. Q.

, and Richard

R. M.

Attenuation of Stresses for Buried Cylinders. Proc., Symposium on Soil-Structure Interaction, University of Arizona Engineering Research Laboratory, Tucson, 1964.

McGrath

T. J.

Design Method for Flexible Pipe. Simpson Gumpertz Heger, San Francisco, Calif., 1998.

10.

McGrath

T. J.

Calculating Loads on Buried Culverts Based on Pipe Hoop Stiffness. In Transportation Research Record: Journal of the Transportation Research Board, No. 1656, TRB, National Research Council, Washington, D.C., 1999, pp. 73–79.

11.

Sargand

S. M.

, and Masada

Soil Arching over Deeply Buried Thermoplastic Pipe. In Transportation Research Record: Journal of the Transportation Research Board, No. 1849, Transportation Research Board of the National Academies, Washington, D.C., 2003, pp. 109–123.

12.

Watkins

R. K.

, and Spangler

M. G.

Some Characteristics of the Modulus of Passive Resistance of Soil: A Study in Similitude. Presented at 37th Annual Meeting of the Highway Research Board, Washington, D.C., 1958.

13.

Kondner

R. L.

Hyperbolic Stress-Strain Response: Cohesive Soils. Journal of the Soil Mechanics and Foundations Division, Vol. 98, No. SM1, 1963, pp. 115–143.

14.

Duncan

J. M.

, and Chang

C. Y.

Nonlinear Analysis of Stress and Strain on Soils. Journal of Soil Mechanics and Foundation Division, Vol. 96, No. SM5, 1970, pp. 1629–1653.

15.

Selig

E. T.

Soil Parameters for Design of Buried Pipelines. In Pipeline Infrastructure: Proceedings of the Pipeline Infrastructure Conference, ASCE, New York, 1988.

16.

Lin

R.-S.D.

Direct Determination of Bulk Modulus of Partially Saturated Soils. University of Massachusetts, Amherst, 1987.

17.

ABAQUS Standard User's Manual Version 6.4. Hibbit, Karlsson & Sorensen, Inc., Pawtucket, R.I., 2003.

18.

MSC/NASTRAN Reference Manual Version 70. MacNeal-Schwendler Corp., Los Angeles, Calif., 1998.

19.

Musser

S. C.

CANDE-89 User Manual. FHWA-RD-89-169. FHWA, U.S. Department of Transportation, 1989.

20.

Kim

, and Yoo

C. H.

Design Loading for Deeply Buried Box Culverts. Journal of Geotechnical and Geoenvironmental Engineering, Vol. 131, No. 1, 2005, pp. 20–27.

21.

McVay

M. C.

Evaluation of Numerical Modeling of Buried Conduits. PhD dissertation. Department of Civil Engineering, University of Massachusetts, Amherst, 1982.

22.

Sargand

S. M.

, Hazen

G. A.

, and Masada

Field Verification of Structural Performance of Thermoplastic Pipe Under Deep Backfill Conditions. Ohio Department of Transportation, FHWA, U.S. Department of Transportation, 2002.

23.

McAffee

R. P.

, and Valsangkar

A. J.

Geotechnical Properties of Compressible Materials Used for Induced Trench Construction. Journal of Testing and Evaluation, Vol. 32, No. 2, 2004, pp. 143–152.

24.

Horvath

J. S.

Geofoam Geosynthetic. Horvath Engineering, Scarsdale, N.Y., 1995.

25.

Sargand

S. M.

, Masada

, and Schehl

D. J.

Soil Pressure Measured at Various Fill Heights Above Deeply Buried Thermoplastic Pipe. In Transportation Research Record: Journal of the Transportation Research Board, No. 1770, TRB, National Research Council, Washington, D.C., 2001, pp. 227–235.

26.

Sargand

S. M.

, Hazen

G. A.

, White

, and Moran

Time-Dependent Deflection of Thermoplastic Pipes Under Deep Burial. In Transportation Research Record: Journal of the Transportation Research Board, No. 1770, TRB, National Research Council, Washington, D.C., 2001, pp. 236–242.

27.

Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 22nd ed. AASHTO, Washington, D.C., 2002.

28.

LRFD Bridge Construction Specifications, 2nd ed. AASHTO, Washington, D.C., 2004.

29.

Spangler

M. G.

A Theory of Loads on Negative Projecting Conduits. Highway Research Board Proceedings, Vol. 30, 1950, pp. 153–161.

30.

Vaslestad

, Johansen

T. H.

, and Holm

Load Reduction on Rigid Culverts Beneath High Fills: Long-Term Behavior. In Transportation Research Record 1415, TRB, National Research Council, Washington, D.C., 1994, pp. 58–68.