This paper summarizes the Spanish experience in the design and control of cold in-place recycling of asphalt pavements. First, results obtained in the laboratory after the mixture design process are compared with the densities encountered in the field. Second, the application of the Superpave® gyratory compactor for specimen manufacture during the design stage is analyzed by varying the standard conditions of gyration angle and vertical pressure. Finally, a new design method based on the indirect tensile test is proposed.
Get full access to this article
View all access options for this article.
References
1.
SalomonA., and NewcombD.Cold In-Place Recycling Literature Review and Preliminary Mixture Design Procedure. Final report. Department of Civil Engineering, University of Minnesota, Minnesota Department of Transportation Office of Research Services, St. Paul, Aug. 2000.
2.
CrossS. A.Determination of Superpave® Gyratory Compactor Design Compactive Effort for Cold In-Place Recycled Mixtures. In Transportation Research Record: Journal of the Transportation Research Board, No. 1819, Transportation Research Board of the National Academies, Washington, D.C., 2003, pp. 152–160.
3.
LeeK. W., BraytonT. E., GressD., and HarringtonJ.Laboratory Evaluation of Mix-Design Methods for Cold In-Place Recycling. Proc, Fifth ASCE Materials Engineering Congress (BanksL. C., ed.), American Society of Civil Engineers, Reston, Va., 1999, pp. 756–769.
4.
LauterK. A., and CorbettM. A.Developing Gyratory Compactor Guidelines for Use with Cold In-Place Recycled Material. Proc., Canadian Technical Asphalt Association, Polyscience Publications, Inc., Morin Heights, Quebec, Canada, 1998.
5.
MallickR. B., KandhalP., BrownE. R., TetoM., BradburyR., and KearneyE.Development of a Rational and Practical Mix Design Method for Full Depth Reclamation. Journal of the Association of Asphalt Pavement Technologists, Vol. 70, 2001, pp. 176–205.
6.
SebaalyP. E., BaziG., HittiE., WeitzelD., and BemanianS.Performance of Cold In-Place Recycling in Nevada. In Transportation Research Record: Journal of the Transportation Research Board, No. 1896, Transportation Research Board of the National Academies, Washington, D.C., 2004, pp. 162–169.
7.
NCHRP Synthesis of Highway Practice 160: Cold-Recycled Bituminous Concrete Using Bituminous Materials.TRB, National Research Council, Washington, D.C., 1990.
8.
CrossS. A.Determination of Ndesign for CIR Mixtures Using the Superpave Gyratory Compactor RMRC Research Project No. 15. Recycled Materials Resource Center, University of Kansas Center for Research, Inc., Lawrence, April 2002.
