Direct Method for Evaluating Structural Needs of Flexible Pavements with Falling-Weight Deflectometer Deflections

Abstract

A direct and simple method (YONAPAVE) for evaluating the structural needs of flexible pavements is presented. It is based on interpretation of measured falling-weight deflectometer (FWD) deflection basins using mechanistic and practical approaches. YONAPAVE estimates the effective structural number (SN) and the equivalent subgrade modulus independently of the pavement or layer thicknesses. Thus, there is no need to perform boreholes, which are expensive, time-consuming, and disruptive to traffic. Knowledge of the effective SN and the subgrade modulus together with an estimate of the traffic demand allows the determination of the overlay required to accommodate future needs. YONAPAVE’s simple equations can be solved using a pocket calculator, making it suitable for rapid estimates in the field. The simplicity of the method, and its independence from major computer programs, make YONAPAVE suitable for estimating the structural needs of a road network using FWD data collected on a routine or periodic basis along network roads. YONAPAVE can be used with increased experience and confidence as the basis for nondestructive testing structural evaluation and overlay design at the project level.

Get full access to this article

View all access options for this article.

References

AASHTO Guide for Design of Pavement Structures. American Association of State Highway and Transportation Officials, Washington, D.C., 1993.

Rohde

G. T.

Determining Pavement Structural Number from FWD Testing. In Transportation Research Record 1448, TRB, National Research Council, Washington, D.C., 1994, pp. 61–68.

Hall

K. D.

, and Elliot

R. P.

. ROADHOG—A Flexible Pavement Overlay Design Procedure. In Transportation Research Record 1374, TRB, National Research Council, Washington, D.C., 1992, pp. 9–18.

Romanoschi

, and Metcalf

J. B.

. Simple Approach to Estimation of Pavement Structural Capacity. In Transportation Research Record 1652, TRB, National Research Council, Washington, D.C., 1999, pp. 198–205.

Ioannides

A. M.

Theoretical Implications of the AASHTO 1986 Nondestructive Testing Method 2 for Pavement Evaluation. In Transportation Research Record 1307, TRB, National Research Council, Washington, D.C., 1991, pp. 211–220.

Heukelom

, and Klomp

A. J. G.

. Dynamic Testing as a Means of Controlling Pavements During and After Construction. In Proc., First International Conference on Structural Design of Asphalt Pavements, University of Michigan, 1962.

Michalak

C. H.

, and Scullion

. Modulus 5.0: User’s Manual. Texas Transportation Institute, College Station, Nov. 1995.

ELMOD4. Dynatest International, Denmark. http://www.dynatest.com.

Uzan

Estimation of Subgrade Thickness from Deflection Basin Analysis. In Proc., Fifth International Conference on the Bearing Capacity of Roads and Airfields, Trondheim, Norway, 1998.

10.

Hogg

A. H. A.

Equilibrium of a Thin Plate, Symmetrically Loaded, Resting on an Elastic Foundation of Infinite Depth. Philosophical Magazine, Vol. 25, No. 168, 1938, pp. 576–582.

11.

Hogg

A. H. A.

Equilibrium of a Thin Slab on an Elastic Foundation of Finite Depth. Philosophical Magazine, Vol. 35, No. 243, 1944, pp. 265–276.

12.

Wiseman

, Uzan

, Hoffman

M. S.

, Ishai

, and Livneh

. Simple Elastic Models for Pavement Evaluation Using Measured Deflection Bowls. In Proc., Fourth International Conference on the Structural Design of Asphalt Pavements, Ann Arbor, Mich. 1977, Vol. II.

13.

Hoffman

M. S.

Application of Elasticity Models for Evaluation of Flexible Pavements (in Hebrew). Thesis submitted in partial fulfillment for M.Sc. degree. Technion-Israel Institute of Technology, 1977.

14.

Hoffman

M. S.

, and Thompson

M. R.

. Comparative Study of Selected Nondestructive Testing Devices. In Transportation Research Record 852, TRB, National Research Council, Washington, D.C., 1982.