Crack Propagation in Portland Cement Concrete Beams: Implications for Pavement Design

Abstract

Hillerborg's fictitious crack model is used to simulate numerically progressive crack development in simply supported concrete beams. The tools used in the simulation are a general-purpose finite element package for the linear elastic aspects of structural response and specially coded iterative program CRACKIT for tracking crack propagation. Data generated in this manner are used to study the specimen-size effect, that is, the dependence of fracture behavior on geometric, boundary, and loading conditions. The numerical approach presented is used successfully to reproduce experimental and numerical results obtained by independent investigators. The main objective for the research is to examine how principles of similitude proposed in recent years and the experience gained in the application of dimensional analysis to concrete pavement data interpretation can aid in the formulation of more mechanistic-based failure criteria, which would eventually lead to improved pavement design procedures. Because of its similarity to conventional fatigue curves, a plot prepared by Gustafsson, of the normalized bending stress against the brittleness number, is found to deserve additional consideration as a possible candidate for this purpose.

Get full access to this article

View all access options for this article.

References

Hillerborg

, Modeer

, and Petersson

P. E.

. Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements. Cement and Concrete Research, Vol. 6, No. 6, 1976, pp. 773–782.

Ioannides

A. M.

Fracture Mechanics Applications in Pavement Engineering: A Literature Review. U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss., 1995.

Ioannides

A. M.

Fracture Mechanics in Pavement Engineering: The Specimen-Size Effect. In Transportation Research Record 1568, TRB, National Research Council, Washington, D.C., 1997, pp. 10–16.

Bache

H. H.

Fracture Mechanics in Design of Concrete Pavements. Proc., International Conference on Fracture Mechanics of Concrete: Fundamentals and Applications ( Wittman

F. H.

, ed.), Elsevier Science, Amsterdam, Netherlands, 1986, pp. 577–586.

Bache

H. H.

, and Vinding

. Fracture Mechanics in Design of Concrete Pavements. Proc., Second International Workshop on the Design and Evaluation of Concrete Pavements, Information and Technology Centre for Transport and Infrastructure/Permanent International Association of Road Congresses—World Road Association, Sigüenza, Spain, 1990, pp. 139–165.

Ioannides

A. M.

Extension of Westergaard Solutions Using Dimensional Analysis. Proc., Second International Workshop on the Design and Evaluation of Concrete Pavements, Information and Technology Centre for Transport and Infrastructure/Permanent International Association of Road Congresses—World Road Association, Sigüenza, Spain, 1990, pp. 357–388.

Miner

M. A.

Cumulative Damage in Fatigue. Transactions of the American Society of Mechanical Engineers, Vol. 67, Sept. 1945, pp. 159–164.

Ioannides

A. M.

Pavement Fatigue Concepts: A Historical Review. Proc., Sixth International Conference on Concrete Pavements, Vol. 3, Indianapolis, Ind., 1997, pp. 147–159.

Kaplan

M. M.

Crack Propagation and Fracture of Concrete. Journal of the American Concrete Institute, Vol. 58, No. 5, 1961, pp. 591–609.

10.

Hillerborg

Analysis of One Single Crack. In Fracture Mechanics of Concrete ( Wittman

F. H.

, ed.), Elsevier Science, Amsterdam, Netherlands, 1983, pp. 223–249.

11.

Bache

H. H.

Principles of Similitude in Design of Reinforced Brittle Matrix Composites. Presented at International Workshop on High Performance Fiber Reinforced Cement Composites, Mainz, Germany, June 1991.

12.

Petersson

P. E.

Crack Growth and Development of Fracture Zones in Plain Concrete and Similar Materials. Report TVBM-1006. Division of Building Materials, University of Lund, Sweden, 1981.

13.

GTSTRUDL. Finite Element Computer Software System for Structural Analysis and Design. User's Manual. Georgia Tech Research Corporation, Georgia Institute of Technology, Atlanta, 1993.

14.

Liu

Time-Dependent Fracture of Concrete. Ph.D. dissertation. Ohio State University, Columbus, 1994.

15.

Kim

S. C.

Composite Fracture Behavior of Concrete. Ph.D. dissertation. Ohio State University, Columbus, 1994.

16.

Sengupta

Finite Element Simulation of Crack Growth in PCC Beams: Implications for Concrete Pavement Design. M.S. thesis. University of Cincinnati, Cincinnati, Ohio, 1998.

17.

Gustafsson

P. J.

Fracture Mechanics Studies of Non-Yielding Materials Like Concrete: Modeling of Tensile Fracture and Applied Strength Analysis. Report TVBM-1007. Division of Building Materials, University of Lund, Sweden, 1985.

18.

Karihaloo

B. L.

, and Nallathambi

. Notched Beam Test: Mode I Fracture Toughness. In Fracture Mechanics Test Methods for Concrete ( Shah

S. P.

and Carpinteri

, eds.), RILEM Report 89-FMT. International Union of Testing and Research Laboratories for Materials and Structures, Paris, 1991, pp. 1–86.

19.

ABAQUS. General Purpose Finite Element Analysis Program. User's Manual, Version 5.4. Hibbitt, Karlsson and Sorenson, Inc., Pawtucket, R.I., 1994.