The speed profiles of trucks in rolling and mountainous terrain are important when assessing design consistency of highways. A method is described for calculating speed profiles for trucks on a vertical alignment. It proceeds from the assumption that acceleration of a truck is a linear function of its speed. The main advantage of the method is that a speed profile can be calibrated for a specific population of trucks. A few examples are given.
Get full access to this article
View all access options for this article.
References
1.
HobanC. J., FawcettG. J., and RobinsonG. K.. A Model for Simulating Traffic on Two-Lane Rural Roads. Australian Road Research Board Technical Manual ATM No. 10A, Victoria, 1985.
2.
WatandaT., et al. Models for Predicting Vehicle Speeds and Operating Costs Based on Mechanistic Principles; Theory Quantification. International Bank for Reconstruction and Development, Washington, D.C., 1985.
3.
LeischJ. E., and LeischJ. P.. New Concepts in Design-Speed Application. In Transportation Research Record 631, TRB, National Research Council, Washington, D.C., 1977, pp. 4–14.
4.
A Policy on Geometric Design of Highways and Streets. AASHTO, Washington, D.C., 1990.
5.
St. JohnA. D., and KobettD. R.. NCHRP Report 185: Grade Effects on Traffic Flow Stability and Capacity. TRB, National Research Council, Washington, D.C., 1978.
6.
OlsonP. L., et al. NCHRP Report 270: Parameters Affecting Stopping Sight Distance. TRB, National Research Council, Washington, D.C., 1984, pp. 146–169.
7.
National Institute for Transport and Road Research. Evaluation of Road User Costs: Technical Manual for Roads 2. NITRR Manual P11, Pretoria, South Africa, 1983.
8.
SmithG. L.Commercial Vehicle Performance and Fuel Economy. SAE Paper SP-355. Society of Automotive Engineers, Warrendale, Pa., Jan.1970.
9.
DrewD. R.Traffic Flow Theory and Control. McGraw-Hill, New York, 1968.
