Interface pressures and shear stresses at different sagittal plane angular alignment settings were measured on 3 trans-tibial amputee subjects ambulating with patellar-tendon-bearing total contact prostheses. Substantial socket-shank angular alignment modifications in the sagittal plane had minimal effect on stance phase peak interface pressures, though more substantial effects on stance phase peak resultant shear stresses. No consistent trend of a greater stress at misaligned vs nominally aligned settings was identified. Changes in interface stresses from session to session tended to be greater than those for different alignment settings, suggesting that subjects compensated well for misalignments but less well for session differences.
AppoldtF ABennettLContiniR. Socket pressure as a function of pressure transducer protrusion. Bull Prosthet Res1969; 10(11)236–249
3.
NaylorP FD. The skin surface and friction. Br J Dermatol1955; 67: 239–248
4.
PattersonR PFisherS V. The accuracy of electrical transducers for the measurement of pressure applied to the skin. IEEE Trans Biomed Eng1979; 26: 450–456
5.
PearsonJ RHolmgrenGMarchLOberoK. Pressures in critical regions of the below-knee patellartendon-bearing prosthesis. Bull Prosthet Res1973; 10(19)52–76
6.
SandersJ EDalyC HBooneD ADonaldsonT F. An angular alignment measurement device for prosthetic fitting. Prosthet Orthot Intl1990; 14: 143–144
7.
SandersJ EDalyC H. Measurement of stresses in 3 orthogonal directions at the residual limb-prosthetic socket interface. IEEE Trans Rehabil Eng1993; 1: 79–85
8.
SandersJ EDalyC HCumminosW RReedR DMarksR JII. A measurement device to assist amputee prosthetic fitting. J Clin Eng1994; 19: 63–71
9.
WinarskiD JPearsonJ R. Least-squares matrix correlations between stump stresses and prosthesis loads for below-knee amputees. J Biomech Eng1987; 109: 238–246
